Trimble Connect User Forum

 View Only
Expand all | Collapse all

Request: Angle Measurement in Trimble Connect

  • 1.  Request: Angle Measurement in Trimble Connect

    Posted 06-22-2021 08:08
    Hi,

    We use Trimble Connect for precast concrete manufacture on the shop floor, measuring dimensions is useful but often we need to take off angles to, which Trimble Connect can't do.

    Could that be added to a future release? 

    Thanks!

    ------------------------------
    James Thorpe
    ------------------------------


  • 2.  RE: Request: Angle Measurement in Trimble Connect

    Posted 06-24-2021 05:20
    Hi James,

    Thanks for the valuable suggestion. We will add this to our Connect for Browser 3D viewer backlog.

    Best regards,
    Jari

    ------------------------------
    Jari Juntunen
    ------------------------------



  • 3.  RE: Request: Angle Measurement in Trimble Connect

    Posted 01-13-2022 06:20
    Hi Jari,

    We're writing some model based manufacturing processes, need to decide where TC is involved or not - has the angle measurement made it's way up the backlog list at all? Joinery, quality teams etc can't do their roles without unfortunately.

    Thanks,

    ------------------------------
    James Thorpe
    ------------------------------



  • 4.  RE: Request: Angle Measurement in Trimble Connect

    Posted 01-13-2022 07:07
    Hi @James Thorpe,

    Thanks for asking. We have created a prototype and are in the process of getting early user feedback. I will be in contact to ask for your feedback.

    Best regards,
    Jari

    ------------------------------
    Jari Juntunen
    ------------------------------



  • 5.  RE: Request: Angle Measurement in Trimble Connect

    Posted 01-13-2022 07:31
    Fantastic!

    ------------------------------
    James Thorpe
    ------------------------------



  • 6.  RE: Request: Angle Measurement in Trimble Connect

    Posted 01-14-2022 06:18
    Hi @Jari Juntunen

    Sorry if I misplace this question: Do you also have plans for giving vertical and horizontal distance in this measure tool? We also really need a tool to measure slope, like the tool in Quadri.​

    ------------------------------
    Martin Holøymoen
    ------------------------------



  • 7.  RE: Request: Angle Measurement in Trimble Connect

    Posted 01-17-2022 06:51
    Hi Martin,

    Thank you for the feature request. Currently the slope measurement tool is not in the planned scope for phase 1. I recorded the need in the backlog. 

    Best regards,
    Jari

    ------------------------------
    Jari Juntunen
    ------------------------------



  • 8.  RE: Request: Angle Measurement in Trimble Connect

    Posted 07-08-2022 00:52
    Hi @Jari Juntunen

    Do you have an update on the slope measurement tool? In civil engineering project it is essential to have control over slope of e.g. fillings and water pipes. I see the need for this tool in TC almost every day, so the function is highly ​desired...

    Best regards
    Martin

    ------------------------------
    Martin Holøymoen
    ------------------------------