Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

'Create at Intervals' not creating points at proper intervals

  • 1.  'Create at Intervals' not creating points at proper intervals

    Posted 12-04-2019 15:45
      |   view attached

    I have an alignment that I need to create points from beginning to end at an interval of 6,330'.  I used the 'Create at Intervals' command and selected the alignment, gave the interval of 6,330', and a starting point number of 5000.  The points that were produced ranged in distances from less than 100' to 4000' +.

     

    Is there something that I missed?

     

    I am attaching the file.

     

    Thanks in advance!

     

    Robert

    Attachment(s)

    zip
    Progress Flight Layout.vce.zip   56 KB 1 version


  • 2.  Re: 'Create at Intervals' not creating points at proper intervals

    Posted 12-06-2019 15:34

    its picking up all of the curve points.

     

    run create horizontal alignment labels

    give it an interval of 6330 for major lines and no minor lines

    center the ticks with a width of 100

    run the create points from cad command

    create a point at the center of the cross section lines

     

    tim