• Match Properties needs to be more flexible

    I think match properties needs to be more flexible. If I want to copy something such as color it shouldn't matter what the source object is and what the target object is as long as they both have that same attribute y...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Cutting plane view, dont se surface

    Hi!   This is probably a error 60 but i cant understand what i am missing here.  I have a (almost) vertical surface wich i made by sideslope command and its suppose to represent a propertyline. I want to s...
  • Working with GCS900 and Earthworks Systems

    I get a lot of Questions around creating and managing data for the GCS900, Earthworks and Siteworks / SCS900 systems. So much so that I feel that the creation of a Blog Post (that is easy to locate) that captures all ...
    Alan Sharp
    last modified by Alan Sharp
  • Copy And Paste Between Projects

    If I want to take some info from one project and put it in another I currently export it as a dxf and then import the dxf into my new project, this feels time consuming and after a while you end up with a load of dxf ...
    Fred Lusted
    last modified by Fred Lusted
  • Why are my Earthwork Reports showing "0" volumes?

    I'm trying to run an earthwork report between two surfaces using a boundary. It takes about 15 minutes to compute, then when the report is done generating it shows Cut=0.0, Fill=0.5 Yds. The closed boundary covers 39 ...
    Brandon Tobias
    last modified by Brandon Tobias
  • Hidden UCS geometry from imported DGN file?

    I have imported a designer .dgn file.  Cleaned it up and sent the .dxf linework file out to the field.  I then get this picture from my guys. Here is that same line before he selects it:     ...
    Tysen Ellison
    last modified by Tysen Ellison
  • Advanced Corridor Modeling

    As I spend more time with Dealers and Customers, I have found that there are many things in Corridor Modeling that are either unknown or mis-understood. Over the next few weeks  am going to post some blog entries...
    Alan Sharp
    last modified by Alan Sharp
  • APAC Region - Power User Group (PUG) Training for TBC Users

    11/18/19 2:00 PM
    Save The Date! Asia Pacific Regional Power User Group (PUG) Training Trimble Business Center - Construction November 19th - 21st 2019     When / Where Is The Event? Trimble is pleased to announce a...
    Alan Sharp
    last modified by Alan Sharp
    APAC Region - Power User Group (PUG) Training for TBC Users
    Back
  • Data Prep and Takeoff Questions

    I got this email from a user in UK today and I thought that it raised some good points and some good "learning" opportunities. There was one defect, a few things hat can already be done and a couple of great little en...
    Alan Sharp
    last modified by Alan Sharp
  • View filter manager, remove one and a lot more disapperars?

    Hi!   Look att the video. When i try to remove things from viewfilters a lot more that i want disappears. Maybe its because i need to have the filters in a special order but "Move up" "movedown" and "Layer manag...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • CAD Editing Tips and Tricks

    As you dig deeper and deeper into TBC and use it for more and more tasks in your daily workload, you start to ask "how do I do this or that" when the tools that are provided may not do what you specifically want. In t...
    Alan Sharp
    last modified by Alan Sharp
  • Utility Detail Report on Pipes and Structures

    Recently built a few Utility Storm and Sanitary lines using the Utility commands. When finished i tried to get a report that would list the pipes and structure.  There did not seem to be a viable report. i expe...
    Ron Ciccarone
    last modified by Ron Ciccarone
  • AutoCAD Point Block Examples.zip

    This is a Test DXF File to show how TBC Exports Point Number, Code and Line Names to AutoCAD DXF or DWG formats and allows it to read these same file formats from AutoCAD or SCS900 / Siteworks systems to round trip Po...
    Alan Sharp
    last modified by Alan Sharp
  • Test CAD Outputs.dwg

    Alan Sharp
    last modified by Alan Sharp
  • Custom Export Tab

    Could we get a custom export tab where a user can set the exports they use most? There are about 5 exports I use on a regular basis. It would be great to get these in one tab and would save scrolling through unused ex...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Power User Group 2.0 Training Materials

      After another successful PUG Power Users Group Conference in April, I am pleased to provide those of you that could not make it to Colorado with the Training Exercises that we went through at the event. I will...
    Alan Sharp
    last modified by Alan Sharp
  • Side Slope - Building Foundation Comments

    Here are a few comments on using the create side slope tool to model a building foundation model and what I think would help speed up the process.   Summary: Layers need to default to the last layers used Copy...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Working With AutoCAD and Civil 3D Files

    I see a lot of traffic internally and through the Forum on this subject and have decided that a Blog Post where we can capture all "Working With AutoCAD and Civil 3D questions" in one place as a resource for you all t...
    Alan Sharp
    last modified by Alan Sharp
  • Trimble Library - Videos That Help You Learn

    One thing that I am finding when visiting customers around the US is that they have not heard of the Trimble Library. This is an awesome training and learning resource where we post a large number of training videos c...
    Alan Sharp
    last modified by Alan Sharp
  • Interior Surface Edge Breakline

    enhancement request Alan Sharp   Looking for a method to clip a surface model as an interior edge breakline.  We receive surface models from outside sources that may need to be clipped and then add additio...
    Matt Voge
    last modified by Matt Voge