• Corridor Template - Reference Surface wrong vertically?

    I got this issue raised to me today so I thought I would capture it here for all to be aware of. The problem was identified by a User. They had built a Road Model as two corridors. One corridor for the left side, the ...
    Alan Sharp
    created by Alan Sharp
  • Zone embankment in corridor definition

    Hello,   I am trying to define a corridor template for a zoned embankment.   Specs I am bound by are quite simple:   If fill is less then 2m in thickness-> use only class A1 material. If fill is ...
    Marian Plucinski
    last modified by Marian Plucinski
  • How to tie two designed surfaces together?

    Anyone know the best way to tie two surfaces together? I have a surface coming in at an angle and would like to make a smooth transition with correct slopes. Thanks.  
    Pablo Giraldo
    last modified by Pablo Giraldo
  • Export Trimble Access Road Strings Error

    (Backstory) I am hunting for the best option to be able to reuse my corridor build to perform stakeout operations in the field. Specifically i am attempting to cut out the need for my field guys from having to key in ...
    Joe Melchiori
    last modified by Joe Melchiori
  • Corridor Template Crashes 5.20

    When I try to make a template for my corridor 5.20 crashes.  Completely shuts down business center. I'm using command "InsertCorridorTemplate" It does it on all jobs so I don't think it is a data problem I hav...
    ron fucinaro
    last modified by ron fucinaro
  • Copy & Paste Error in a slope table

    I'm using version 5.10.  Recently (within the past week), when using the Side Slope to add an instruction in Corridor modeling, when I build the Cut Table, the copy and paste it to the Fill Table, it loses the le...
    Robert Stallings
    last modified by Robert Stallings
  • Holes in corridor, what am i doing wrong?

    I will attache a .VCE file here with a corridor and one template. Is someone can import it and see what i am doing wrong here. I get holes in the corridor at different places and it seems like it has to do with my ali...
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • PC to DiNi workflow

    PC to DiNi workflow:   We recently purchased a DiNi and after using it in the field, it became apparent that the ability to import point sets would greatly increase productivity in the field. While the workflow ...
    nate doyle
    last modified by nate doyle
  • TBC v5.3 Released Yesterday (April 27 2020)

    Trimble Business Center v5.3 Released yesterday (April 27 2020). Hot on the heels of the 5.21 Release that was made a few weeks ago by the CEC Division at the ConExpo Trade Show in Las Vegas. The 5.30 Release is packe...
    Alan Sharp
    last modified by Alan Sharp
  • Best Approach to Model Corridor Gaps?

    What is the best approach to manually modeling between gaps in a corridor? I have recently started adding my manually created linework to gapped sections in my corridor "finish" surface to create my "still dynamic" fu...
    Joe Melchiori
    last modified by Joe Melchiori
  • Duplicate Corridor

    I am still in the stages of playing with Corridors and making one corridor mutliple times.  So, here is where are here in our office.  The higher up people choose to have two seperate reports and at time mor...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Custom Ribbon Layout For v5.1.bin

    In response to popular request, I have updated the TBC Menu Ribbons for contractors and enclose it here. The new Menu Ribbon includes Updated Quick Access toolbar Side Toolbars Keyboard Shortcuts for more commands ...
    Alan Sharp
    last modified by Alan Sharp
  • Feature Request - Customize Tabs Export One Tab

    I think it would be of value to have the ability to export only certain tabs. Before upgrading to TB-HCE 4, I had gone through and made a tab that match my work flow, taking bits from all of the tabs I bounce around i...
    Patrick L'heureux
    last modified by Patrick L'heureux

    I am looking for a truck turning radius TML similar to the one we used to be able to get for Terramodel.  I think Geocomp made the one for Terramodel originally.  We do a lot of design builds for grain eleva...
    Ben Ryschon
    last modified by Ben Ryschon
  • Alignment Geometry Report

    Is there a way to run multiple or all Alignment Geometry Reports at one time? There's usually several alignments in most projects, recently I had a project with 53 alignments.
    Eric Schmeusser
    last modified by Eric Schmeusser
  • Copy Corridor Table ?

    Trying to wrap my head around an issue with coping table in corridor.   When I copy a offset/slope table,  the slope gets copied in the VC Length column.  What am i missing to get the slope in the ...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Mass Haul Reverse Direction

    I am creating a Mass Haul with TBC. For constructability reasons we are starting from the the end of the chainage instead of the Start. Is there any way I can illustrate my mass haul to show excavation 0m3 at the end ...
    Karla Firth
    last modified by Karla Firth
  • Feature Request - Side Slope Command Enhancement

    I've started to really dig deep into the use of the Side Slope command. I think it's going in the right direction but its not 100% there yet. The circumstances i am currently using it are to build corridor type featur...
    Joe Melchiori
    last modified by Joe Melchiori
  • How to add textures to corridors?

    I was wondering if there was a quick way to add textures to your corridor surfaces?  I am sure you need to use the MSI but I am not real comfortable with it.  And on that note is there a place to go get good...
    Ben Ryschon
    last modified by Ben Ryschon

    This is something I have been running into a lot of lately.  If you try to copy selected rows from a table to paste into another table for a template command the it doesn't come across clean or correct even thoug...
    Ben Ryschon
    last modified by Ben Ryschon