• How to add textures to corridors?

    I was wondering if there was a quick way to add textures to your corridor surfaces?  I am sure you need to use the MSI but I am not real comfortable with it.  And on that note is there a place to go get good...
    Ben Ryschon
    last modified by Ben Ryschon
  • Bug Report - Alignment Labeling

    There appears to be a bug, or at least a misunderstanding in the alignment labeling function.  The issue is with the spacing for the major ticks: as long as the value you are using for the spacing is an even mult...
    Wayne Welshans
    last modified by Wayne Welshans
  • TBC Power Hour for Construction - TBC TML Macros

    1/14/20 8:00 AM
    The next TBC Power Hour in January 2020 will take a deep dive into the TML Macro Capabilities of Trimble Business Center. The session will cover the following points   What is a TML Macro? Why did Trimble add M...
    Alan Sharp
    last modified by Alan Sharp
    TBC Power Hour for Construction - TBC TML Macros
    Back
  • North Arrow and Scale Bar - Video

    Does anyone here know if a video exists somewhere on how to place a scale bar and north arrow in sheets?
    Eric Condemilicor
    last modified by Eric Condemilicor
  • Plotting Cross Sections

    I am trying to plot cross-sections for a corridor. I am editing the Sheet and when I do so I dont see any cross sections. I am sure its a setting some where but unsure where it is. 
    Karla Firth
    last modified by Karla Firth
  • Exporting hatch objects to machines

    Hello,   Is it possible to export Hatch Objects to the machines/data collectors from V5.20?   Thanks,   Chad Kyllo
    Chad Kyllo
    last modified by Chad Kyllo
  • Custom rdlc Reports

    I have created several rdlc reports for Business Center from taking the stock BC report, such as the earthwork report, and manipulating these to more fit our needs and layout. It seems to work well but my issue is tha...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Drafting - Print to PDF - Doesn't work with DropBox as save location

    I save all of my data in a DropBox folder as a fail safe. This deems to work excellent except for when printing to PDF via the Print Plan Set command.   The work around is to save this to the desktop and th...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Plotting XS - linetype only plotting as solid

    Plotting XS - I cannot get the linetype of the surfaces to plot correctly.  I only get solid lines.  In the "Edit Sheet Set" display, I see that the linetype is applied.  But the linetype is solid for t...
    Jennifer Metz
    last modified by Jennifer Metz
  • Trimble Business Center v5.1 Release Overview.pptx

    The enclosed Presentation (covered in the videos posted earlier today) is the source presentation for the TBC v5.1 Release Webinar this morning.
    Alan Sharp
    last modified by Alan Sharp
  • Clear Job Site

    Are we able to clear a job site file and create a whole new job site in a TBC file that already has one created or clear the existing file out?
    David Ballew
    last modified by David Ballew
  • Blocks? Doors & Windows

    I will be creating a floor plan of our building after measuring all interior rooms.  If there was only a laser/app combo it would make it much easier then use laser to edit app measurements.   I will b...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • feature Request - Drafting - Profile - Intersection Slopes

    I wish the intersection slopes would apply a sign value to offset vertical( high point +, low point -). If I use a positive vertical offset, my slopes will be in conflict with my profile and vice-versa.    ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Drafting - Plan and Profile - Turning Point of a Curve

    Is there a way to label the turning points of curves; station and elevation? You can label the high points and low points but this does not work when you have intermediate curves.   If not please add as an enhan...
  • Simple Printing

    When I do a takeoff I print the cut fill maps by using a plot box, rather than go thru the somewhat complex steps of drafting and dynaviews. The problem is all I get is a piece of paper with my cut fill map, and noth...
    ron fucinaro
    last modified by ron fucinaro
  • Why is two lots of text being created in profile view?

    I have added some reference lines to a corridor (IL of existing services) and trying to annotate it with text however for some reason it keeps adding two lots of text. It seems it is trying to annotate text for each s...
    Shaune Dorron
    last modified by Shaune Dorron
  • "Dynaview Collection" along an alignment?

    95% of my current workload is corridor projects. It would be nice to expeditiously create a Dynaview Collection along an alignment to generate clean plan sets. I have googled around to no avail and any help would be g...
    Andy Deveney
    last modified by Andy Deveney
  • Feature Request - Plan Sets - Have text in printed PDF Keep Hyperlink property

    Is it possible to have hyperlinks that are printed to pdf keep there hyperlink property?   In the example, I am demoing a link to our website but this would be useful for things such as: email adresses GIS Map...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • TBC Power Hours for Construction

    I will be posting Links and Content Download for all the TBC Power Hours for Construction on this Blog going forwards. The Power Hour concept was initiated by the Geospatial Team a couple of years ago and has been hug...
    Alan Sharp
    last modified by Alan Sharp
  • Any way to create flow arrows?

    Wondering if there is any way to create little flow arrows to indicate drainage or flow channels along with my slope text? Or maybe they are already made in TBC and I can't find them.I have attached a screenshot of wh...
    Dane Myran
    last modified by Dane Myran