• Power User Group 2.0 Training Materials

      After another successful PUG Power Users Group Conference in April, I am pleased to provide those of you that could not make it to Colorado with the Training Exercises that we went through at the event. I will...
    Alan Sharp
    last modified by Alan Sharp
  • Save the Date - Trimble Business Center - Power User Group - Europe

    2/11/20 12:00 AM
      Due to "Popular Demand" and repeated requests from our Geospatial and Construction Distribution Partners, we have finalized the venue and dates for the first Trimble Business Center - Power Users Group me...
    Alan Sharp
    last modified by Alan Sharp
    Save the Date - Trimble Business Center - Power User Group - Europe
  • SCS900 New Datum Create

    I am using Smart Gnns SPS985L with JunoT41 Controller.I want create new datum for our project.Not included in SCS900 sofware.How can I do that? Please find attached our Local datum geodetic parameters.
    Burak Bekiroglu
    last modified by Burak Bekiroglu
  • Is it possible to use smart text to show the volume of a surface?

    I am hoping to use smart text to cut down on the time it takes me to interrogate surfaces that I create for house foundations.   I'm hoping that there might be an easier way than running a stockpile/depression r...
    Matthew Pitt
    last modified by Matthew Pitt
  • APAC Region - Power User Group (PUG) Training for TBC Users

    11/17/19 5:00 PM
    Save The Date! Asia Pacific Regional Power User Group (PUG) Training Trimble Business Center - Construction November 18th - 20th 2019     When / Where Is The Event? Trimble is pleased to announce a...
    Alan Sharp
    last modified by Alan Sharp
    APAC Region - Power User Group (PUG) Training for TBC Users
  • Design export trouble after installing 5.1

    Hi!   Suddenly i cant create designs anymore. I have reinstalled TBC twice with no luck. Any ideas? 
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • Trimble CAT Used IP Ports

    Please see Trimble CAT Used IP Ports - Google Sheets for the most current information
    Alan Sharp
    last modified by Geoffrey Kirk
  • Is there a way to create a 3-dimensional avoidance zone?

    I have a crew that is backfilling a commercial building foundation and it would be helpful to create a 3D avoidance zone to protect the individual concrete piers and their anchor bolts at the top.  Ideally, the o...
    Anthony Dalla
    last modified by Anthony Dalla
  • antenn32.dll Error When Using Construction Data Design Export

    When trying to export a project, see the attached error I receive. I tried reinstalling Business Center and used the Cleanup Utility. I tried exporting and importing my surface and linework into a new file to see if t...
    Adam Bower
    last modified by Adam Bower
  • Working with GCS900 and Earthworks Systems

    I get a lot of Questions around creating and managing data for the GCS900, Earthworks and Siteworks / SCS900 systems. So much so that I feel that the creation of a Blog Post (that is easy to locate) that captures all ...
    Alan Sharp
    last modified by Alan Sharp
  • Feature Request - Work Orders Summary- Show last Modified column

    In the Work Orders Summary, it would be very useful to see a column that had the modified date. This would be useful because field crews do not always tell you the name of the work order that they used for their work....
    Patrick L'heureux
    last modified by Patrick L'heureux
  • CAD circles becoming lines and 'edged' in .svl

    Hi,   This has only occurred after i switched to TBC v5.0. I am running v5.10 but the same issue remains. I have a challenge with all CAD circles in my drainage model. When I export my drainage (3Dlinework) mo...
    Martin Matti
    last modified by Martin Matti

    Tengo un problema como puedo invertir la triangulacion en el TBC, si esta triangulacion la importe de un dibujo de autocad (3d face) al  TBC y posteriormente genere la superficie pero no consigo intercambiar tri...
  • Transferring Points - from the Field to TBC and Back

    I am curious how other users handle points from the field software, both SCS900 and Siteworks or other, and the transfer between the field software and TBC. And potentially from TBC back to the field software.   ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Working With SCS900 and Siteworks

    In line with some of the other Blog Posts - I decided that I would start to capture commonly requested information about working with SCS900 and Siteworks products and TBC combined. In this Blog I will post informatio...
    Alan Sharp
    last modified by Alan Sharp
  • SCS Report utility - Quick Release

    In the report utility it shows the Antenna Height as 6.562, even when the quick release is enabled, shouldn't this be 6.692? Without looking at the Report tab to see if they have a quick release enabled when they setu...
    Erik Petersen
    last modified by Erik Petersen
  • way to export to .JXL when I have GC points but no calibration file

    I'm very new to TBC and have only used it in conjunction with Trimble Stratus to process my drone survey flights. Normally I just retrieve the .cal file from one of our guys Trimble rovers and convert that to a .JXL i...
    John Pearson
    last modified by John Pearson

    I'm unsure how to predict what my imported points will look like.   CSVs, SPJs, etc.  Little "circles" or "dots"  Point style labels are another whole thing...   At times it seems nothing I do af...
    Danny Kaser
    last modified by Danny Kaser
  • tmodel XL300.pro

    Alan Sharp
    last modified by Alan Sharp
  • tmodel XL200.pro

    Alan Sharp
    last modified by Alan Sharp