• Machine Control SVD ?

    Recently I did a machine control file ( motor grader ) on a roadway.  The file contained the SVL which had the edge of road base,  the edge of concrete pavement and crown( center line of the road).  I w...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Utilities - Gravity Fittings Not Supported in the Create Utility Nodes

    When creating a utility node, gravity fittings are not available in this interface however you can create a place holder node and change to a gravity node after the fact. I think this is maybe an oversight. Gravity fi...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Create Alignments Layer Default

    I would like to see the Layer name default back to the last used layer or close command check box added to the Create Alignment command. enhancement requests We create alignments for each curb linestring for staking ...
    Thomas Mauriello
    last modified by Thomas Mauriello
  • Office Sync with Tablet

    What is the procedure for setting up office sync to work with TSC7 or Site Tablet 10 since those devices don't work with Windows Mobile Device Center?
    Delton Searles
    last modified by Delton Searles
  • Best Workflow for projects requiring multiple site calibrations.

    I would love to hear how you are handling projects where for whatever reason the site conditions require that more than one base station be used each with its own site calibration.   I know the obvious work arou...
    Wayne Welshans
    last modified by Wayne Welshans
  • Why did I loose my Machine in v5.21?

    I noticed today when I went to up revise a design for my controller and machine that I lost my machine I had created previously in an earlier version of TBC.  Is there a reason for that?  I was able to creat...
    Ben Ryschon
    last modified by Ben Ryschon
  • TBC Power Hour - Macros Update

    6/17/20 9:00 AM
    Join us on Wednesday this week for a TBC Power Hour that addresses the latest updates and new tools relating to Macros for Trimble Business Center.    Click Here to register for the Webinar   Thanks &...
    Alan Sharp
    last modified by Alan Sharp
    TBC Power Hour - Macros Update
    Back
  • Enhancement Request - Model Colors & Export Colors

    I'd like to request an enhancement that would allow me the ability to differentiate model space colors separately from "field" colors (i.e. those that show up on data collectors, machines, etc.). This could be a simil...
    Tyler Lindsay
    last modified by Tyler Lindsay
  • Any way in Siteworks to have stakeout points in layers?

    This is really eating me up. Is there any way in siteworks to turn point on and off within layers? Or does every point become a stakeout? Some of the bridge models we're working with have many points on top of each ot...
    Adam Bower
    last modified by Adam Bower
  • "ctoolbox.exe system error" when trying to Publish to Library

    I'm trying to publish a Finished Grade Design to my library and I can't get it to work for me. The attached image shows the error message that I get every time I try. Does anyone know of a way to fix this?
    Abe Arenas
    last modified by Abe Arenas
  • My Earthworks Machines Stopped Syncing

    I have heard this a few times over the last couple of weeks so I have been trying to get to the bottom of why this is happening. This is what I have found so far - and I managed to get a User in the UK up and running ...
    Alan Sharp
    created by Alan Sharp
  • TCC or Works Manager?

    Just wondering if anyone has any experience of working with both of these systems?   Looking for some customer side opinions of both packages (Pros/Cons etc)   I'm currently using TCC to transfer all of my...
    Matthew Pitt
    last modified by Matthew Pitt
  • antenn32.dll Error When Using Construction Data Design Export

    When trying to export a project, see the attached error I receive. I tried reinstalling Business Center and used the Cleanup Utility. I tried exporting and importing my surface and linework into a new file to see if t...
    Adam Bower
    last modified by Adam Bower
  • Export Trimble Access Road Strings Error

    (Backstory) I am hunting for the best option to be able to reuse my corridor build to perform stakeout operations in the field. Specifically i am attempting to cut out the need for my field guys from having to key in ...
    Joe Melchiori
    last modified by Joe Melchiori
  • Siteworks - Unable to load projection, GEOID

    I recently tried to load a site with siteworks that was using a GEOID for the first time.  This is the error I'm getting.    I loaded the site in SCS900 and it loaded just fine. I also tried it on t...
    Erik Petersen
    last modified by Erik Petersen
  • Export SVD/SVL with TBC 5.30

    I want to export my project as SVD/SVL files for machine control. With TBC 5.20 it worked well. Now I had to edit some little things with TBC 5.30 and the export is not working any more. I get this error: "The high ...
    Titus Emanuel
    last modified by Titus Emanuel
  • .spj File Data Access

    Regarding the .spj files in the Work Order folders on TCC,   Is there a way that once the .spj file is refreshed after a controller sync, that the record.txt file can be automatically generated and placed in the...
    Matt Eklund
    last modified by Matt Eklund
  • Hidden UCS geometry from imported DGN file?

    I have imported a designer .dgn file.  Cleaned it up and sent the .dxf linework file out to the field.  I then get this picture from my guys. Here is that same line before he selects it:     ...
    Tysen Ellison
    last modified by Tysen Ellison
  • TBC v5.3 Released Yesterday (April 27 2020)

    Trimble Business Center v5.3 Released yesterday (April 27 2020). Hot on the heels of the 5.21 Release that was made a few weeks ago by the CEC Division at the ConExpo Trade Show in Las Vegas. The 5.30 Release is packe...
    Alan Sharp
    last modified by Alan Sharp
  • Problems with Construction Data workflow using v5.21

    Hi, Since I installed v5.21 I have a problem when I create a Job Site Design. After select a surface, stakeout points and design map, going in the new folder created by TBC (Trimble SCS900data-->Site-->Designs-...
    Paolo Fortunati
    last modified by Paolo Fortunati