• Hidden UCS geometry from imported DGN file?

    I have imported a designer .dgn file.  Cleaned it up and sent the .dxf linework file out to the field.  I then get this picture from my guys. Here is that same line before he selects it:     ...
    Tysen Ellison
    last modified by Tysen Ellison
  • Custom Ribbon Layout For v5.1.bin

    In response to popular request, I have updated the TBC Menu Ribbons for contractors and enclose it here. The new Menu Ribbon includes Updated Quick Access toolbar Side Toolbars Keyboard Shortcuts for more commands ...
    Alan Sharp
    last modified by Alan Sharp
  • APAC Region - Power User Group (PUG) Training for TBC Users

    11/18/19 2:00 PM
    Save The Date! Asia Pacific Regional Power User Group (PUG) Training Trimble Business Center - Construction November 19th - 21st 2019     When / Where Is The Event? Trimble is pleased to announce a...
    Alan Sharp
    last modified by Alan Sharp
    APAC Region - Power User Group (PUG) Training for TBC Users
  • Power User Group 2.0 Training Materials

      After another successful PUG Power Users Group Conference in April, I am pleased to provide those of you that could not make it to Colorado with the Training Exercises that we went through at the event. I will...
    Alan Sharp
    last modified by Alan Sharp
  • antenn32.dll Error When Using Construction Data Design Export

    When trying to export a project, see the attached error I receive. I tried reinstalling Business Center and used the Cleanup Utility. I tried exporting and importing my surface and linework into a new file to see if t...
    Adam Bower
    last modified by Adam Bower
  • Is there a way to explode solids?

    I ran into an issue yesterday where one of my layout foreman was missing striping data. It was because the arrows were solids from Civil3D. In TBC there is no way of exploding these. What is the best way of handling s...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Modeling from DWG Files

    I got this email this am from a Dealer in Europe and I thought it was worth sharing as it is pretty typical of what we are seeing from AutoCAD / Civil 3D and even Bentley these days   Dealer E=mail I have a prett...
    Alan Sharp
    last modified by Alan Sharp
  • Feature Coding for Control Codes in Access and Processing Feature Codes in TBC

    I had a question from a user this morning about how the Feature Coding in Access is used with the Process Feature Codes in TBC and how to solve a couple of issues relating to    Using 2 Point Blocks Using ...
    Alan Sharp
    last modified by Alan Sharp
  • Design export trouble after installing 5.1

    Hi!   Suddenly i cant create designs anymore. I have reinstalled TBC twice with no luck. Any ideas? 
    Fredrik Bergström
    last modified by Fredrik Bergström
  • How do you delete projects and/or designs remotely with TCC?

    Is there a way to remotely delete projects or designs from Earthworks when using the remote sync with TCC function? We currently have 25 Earthworks machines with remote TCC sync.   The only way I've found to rem...
    Alex Culbertson
    last modified by Alex Culbertson
  • Trimble Business Center v5.1 Release Overview.pptx

    The enclosed Presentation (covered in the videos posted earlier today) is the source presentation for the TBC v5.1 Release Webinar this morning.
    Alan Sharp
    last modified by Alan Sharp
  • Trimble Business Center v5.10 Releases Today

    Trimble Business Center v5.10 Releases Today (May 31 2019)     The Trimble Business Center Version 5.10 releases to users today (May 31st 2019). The installation package will be available to all users by th...
    Alan Sharp
    last modified by Alan Sharp
  • Customer Success Stories

    Attention all SITECHs out there ....   Every day I have discussions with SITECH staff about projects that we end up working together, where we are collectively solving customer project problems to get people up ...
    Alan Sharp
    last modified by Alan Sharp
  • Showcase Your Project Work

    Attention All TBC Construction Users Out There   On a daily basis I see great work being carried out using TBC by you all, covering a wide range of activities for Data Prep, Takeoff, Site Survey and As Builts et...
    Alan Sharp
    last modified by Alan Sharp
  • Errors: Geoid Does Not Exist and The coordinate system could not be exported.Reduce the extents and try again.

    I am trying to export Machine Control from TBC V 5.1. I am exporting in GCS900 Controller Version 12.4 because the contractor has not updated every machine on site. I have done this same model before and I am just try...
    Marshall Cant
    last modified by Marshall Cant
  • TBC 5.0 - while the Alignment Editor is open selections in View Filter Manager don't reflect in the Plan View

    In TBC 5.0, while the Alignment Editor is open changes and/or selections made in View Filter Manager don't reflect in the Plan View. Is this intended behavior?
    Garrick Raczek
    last modified by Garrick Raczek
  • Does Anyone use SNM940 for File Transfer to Machines?

    Question about SNM940 future viability?
    Tom Mauriello
    last modified by Tom Mauriello
  • Is there a setting on the td520 that changes surface files to 3d files, so that i am able to select strings , or is that an issue with the file loaded to the machine?

    Don't have the option to select 3d line files.
    Arty Tabor
    last modified by Arty Tabor
  • Which objects are ignored?

    When creating a design in Construction Data, and adding data to it - sometimes some objects are ignored. What is the best way to visualize what has been left out of the design? If it is a big design with thousands o...
    Lasse Hanberg
    last modified by Lasse Hanberg
  • Why are .dxf files so much larger when exported from TBC v5?

    A file export that was about 66KB on 4.12 is now closer to 3MB.
    Glen Williams
    last modified by Glen Williams