• 5.3 bug -  surface data dxf from SCS 900

    If you work at sea level dealing with negative numbers break lines come in correctly, but the points lose the negative sign.  Did this on two separate projects-surveys finding the same  results.
    HENRY ADAMS
    last modified by HENRY ADAMS
  • Zone embankment in corridor definition

    Hello,   I am trying to define a corridor template for a zoned embankment.   Specs I am bound by are quite simple:   If fill is less then 2m in thickness-> use only class A1 material. If fill is ...
    Marian Plucinski
    last modified by Marian Plucinski
  • LINESTRINGS DISAPPEAR WHEN GRADE TOLERANCE CHANGE

    I am having problems with my line strings getting erased and or disappear when I change the grade tolerance in my project settings.  I have created a cut fill map and I wanted to change the tolerance but when it ...
    Ben Ryschon
    last modified by Ben Ryschon
  • How to tie two designed surfaces together?

    Anyone know the best way to tie two surfaces together? I have a surface coming in at an angle and would like to make a smooth transition with correct slopes. Thanks.  
    Pablo Giraldo
    last modified by Pablo Giraldo
  • EXPLODE SURFACE TML PROBLEM

    I am having problems running the Explode Surface TML.  It will work as long as I don't check the Only at slope break option.  When I do I get this error.  I tried various break angles ranging from 1-5.&...
    Ben Ryschon
    last modified by Ben Ryschon
  • Free Snap, Surface Slicer, and Track Region Outline

    Yesterday I learned, from Alan, that free snap must be on for Surface Slicer and Track Region Outline to work. I had turned it off to more quickly snap a line to a surface. When I tried to use surface slicer and trac...
    Tom Dew
    created by Tom Dew
  • TBC 5.30 - Error with Earthwork Report

    I installed TBC 5.30 yesterday. Now I need to calculate an earthwork report between two surfaces. Without a boundary, things are working. But when I select a boundary, the report shows me 0,0 m³ volume! As a work...
    Titus Emanuel
    last modified by Titus Emanuel
  • bug earthworks report V5.30

    If I run a Earthworks report with a self drawn boundary I get a proper result. But using a closed loop daylight line from the Isopach as boundary the program doesn't compute anything it shows 0, it spits out the repo...
    Ronny Schneider
    last modified by Ronny Schneider
  • TBC v5.3 Released Yesterday (April 27 2020)

    Trimble Business Center v5.3 Released yesterday (April 27 2020). Hot on the heels of the 5.21 Release that was made a few weeks ago by the CEC Division at the ConExpo Trade Show in Las Vegas. The 5.30 Release is packe...
    Alan Sharp
    last modified by Alan Sharp
  • Cut-Fill maps and Merge Surface - Incorrect triangulation

    I have created my Finished Surface using strings from the Designers.   I have Imported boundaries representing different pavement types, draped them on to the surface, exploded them and added to the surface (Sha...
    Marian Plucinski
    created by Marian Plucinski
  • Best Approach to Model Corridor Gaps?

    What is the best approach to manually modeling between gaps in a corridor? I have recently started adding my manually created linework to gapped sections in my corridor "finish" surface to create my "still dynamic" fu...
    Joe Melchiori
    last modified by Joe Melchiori
  • Duplicate Corridor

    I am still in the stages of playing with Corridors and making one corridor mutliple times.  So, here is where are here in our office.  The higher up people choose to have two seperate reports and at time mor...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Custom Ribbon Layout For v5.1.bin

    In response to popular request, I have updated the TBC Menu Ribbons for contractors and enclose it here. The new Menu Ribbon includes Updated Quick Access toolbar Side Toolbars Keyboard Shortcuts for more commands ...
    Alan Sharp
    last modified by Alan Sharp
  • Utility Module - Feature Request and Comments

    I want to first start of with thanking the BC team for the addition of the utility module. This is something I have been asking for and I appreciate the addition and the smoothness of how it works. Well done.   ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Feature Request - Customize Tabs Export One Tab

    I think it would be of value to have the ability to export only certain tabs. Before upgrading to TB-HCE 4, I had gone through and made a tab that match my work flow, taking bits from all of the tabs I bounce around i...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Surface - Swap Triangle lock/save

    Is there a way to lock or save the surface after doing a swap triangle work so it won't go back to the original after rebuilding the surface?
    Eric Condemilicor
    last modified by Eric Condemilicor
  • TBC v5.21 LOCKING UP

    I was wondering if anyone else was having issues with TBC V5.21 locking up.  I am creating a site and I am using point cloud data and I have had it lock up three times in a row when trying to offset a line. ...
    Ben Ryschon
    created by Ben Ryschon
  • Alignment Geometry Report

    Is there a way to run multiple or all Alignment Geometry Reports at one time? There's usually several alignments in most projects, recently I had a project with 53 alignments.
    Eric Schmeusser
    last modified by Eric Schmeusser
  • Feature Request - Side Slope Command Enhancement

    I've started to really dig deep into the use of the Side Slope command. I think it's going in the right direction but its not 100% there yet. The circumstances i am currently using it are to build corridor type featur...
    Joe Melchiori
    last modified by Joe Melchiori
  • How to add textures to corridors?

    I was wondering if there was a quick way to add textures to your corridor surfaces?  I am sure you need to use the MSI but I am not real comfortable with it.  And on that note is there a place to go get good...
    Ben Ryschon
    last modified by Ben Ryschon