• TRUCK TURN TML

    I am looking for a truck turning radius TML similar to the one we used to be able to get for Terramodel.  I think Geocomp made the one for Terramodel originally.  We do a lot of design builds for grain eleva...
    Ben Ryschon
    created by Ben Ryschon
  • Mass Haul Reverse Direction

    I am creating a Mass Haul with TBC. For constructability reasons we are starting from the the end of the chainage instead of the Start. Is there any way I can illustrate my mass haul to show excavation 0m3 at the end ...
    Karla Firth
    last modified by Karla Firth
  • Alternative to Merge Surfaces

    I'm trying to optimize my workflow with using the included "Finish design" surface in TBC.   For the moment, I am on hold with vertical design tools (too many bugs for me currently) and am not the biggest fan of...
    Adam Bower
    last modified by Adam Bower
  • Issues with Float View and Custom Shortcuts

    I would use the floating views more but I have found that when I do, I lose control over my custom shortcuts that I have created (CTRl+L - linestring, Ctrl+O - offset line, Ctrl+E - Elevate). Is this a known issue? So...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Site Calibration Error

    Anyone ever come across this while trying to import a site cal?  
    Matthew Pitt
    last modified by Matthew Pitt
  • Plotting Cross Sections

    I am trying to plot cross-sections for a corridor. I am editing the Sheet and when I do so I dont see any cross sections. I am sure its a setting some where but unsure where it is. 
    Karla Firth
    last modified by Karla Firth
  • looking for Earthworks emulator

    I am ooking for:   Trimble Earthworks and Cat GRADE for Dozers, Excavators and Motor Graders Version 1.10.X Release Package   is there anyone hlping me getting this package?   thanks in advance, ...
    Cees-Jan Klos
    last modified by Cees-Jan Klos
  • Superelevation instructions

    Hello,   I am having a hard time understating how TBC is executing superelevation instructions in corridor modelling.   I have created a dummy corridor with multiple material layers. Typical XFall -3%, max...
    Marian Plucinski
    last modified by Marian Plucinski
  • QUESTION USING VERTICAL DESIGN TOOLSET

    BASIC ROAD WITH 8" VERTICAL CURB USING THE VERTICAL DESIGN TOOLSET.  WHEN APPLYING A "SURFACE TIE" IT TIED TO THE EXISTING GRADE IN A WAY THAT WAS SIMILAR TO THE SHAPE OF MY VERTICAL DESIGN.  ANYONE ELSE SEE...
    john west
    last modified by john west
  • TCC or Works Manager?

    Just wondering if anyone has any experience of working with both of these systems?   Looking for some customer side opinions of both packages (Pros/Cons etc)   I'm currently using TCC to transfer all of my...
    Matthew Pitt
    last modified by Matthew Pitt
  • Issues with Corridor Surface

    I have generated a corridor surface in the attached file. It is giving some issues at some locations. I tried to decipher the problem and rebuit the Surface several times. Could not get an answer for myself. Could som...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Modeling Tip - Use Side Slopes to clean up linework

    Cleaning up contours to elevate edge of pavement from can be a pain and tedious.      Here is a trick I found. I think it speeds up contour cleanup along edges of pavement, especially for site style ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Feature Request - List Elevations when using Contours by Crossing

    I use the contours by crossing command a lot when working with pdf files but I'm constantly stopping to double check that the contours are set correctly  with the properties window.  It would be very helpful...
    Ben Wall
    last modified by Ben Wall
  • Adding spot elevations to Vertical Designs

    Is there a way to add a spot elevation to a vertical design?
    Adam Bower
    last modified by Adam Bower
  • Anyone willing to share some custom v5.2 Ribbons?

    I have been using the v5.1 custom ribbon that Alan posted after the 5.1 release, but hoping there is one similar for this v5.2 release available to use.
    Adam Bower
    last modified by Adam Bower
  • Generate Cross Sections from Surfaces

    I have these two surfaces : 1) RA2 Merged and 2) SBDOGL. I have a Horizontal Alignment. CL 0-75200. I need to generate Cross Sections at 10m intervals and publish them as AutoCAD files. Could some one help.   ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • 'Create at Intervals' not creating points at proper intervals

    I have an alignment that I need to create points from beginning to end at an interval of 6,330'.  I used the 'Create at Intervals' command and selected the alignment, gave the interval of 6,330', and a starting p...
    Robert Stallings
    last modified by Robert Stallings
  • 5.2 Release Issues

    Anyone else having issues with version 5.2 when it comes to the following topics:   Project Cleanup:  Extremely slow compared to 5.1 and has even crashed on me with certain projects that are very small in s...
    Jason Brunetta
    last modified by Jason Brunetta
  • TBC 5.2 INSTALL

    Is his something I need to be concerned with?  I hit yes and things seem to be working.  I am running windows 10 just so you know.
    Ben Ryschon
    last modified by Ben Ryschon
  • Bug - Offset Line Segment

    It seems that a linestring with VPI elevations does not offset correctly when only a segment of the linestring is offset. Please see video.    It appears that VPIs are added at random locations on the ...
    Nick Beachley
    last modified by Nick Beachley