• I think that I am up to date - if not let me know

    I believe that I have pretty much caught up on the Forum questions - please let me know if I have not answered or followed up on a question that you have posted and I will get to it next week   Right now I know ...
    Alan Sharp
    last modified by Alan Sharp
  • Selection Methods in BC-HCE and TBC

    In the last week I have had two separate users asking a similar / related question. In both cases the users stated that data that was in their project had "disappeared". In both cases I followed up, and the data was i...
    Alan Sharp
    last modified by Alan Sharp
  • Attribute Text Orientation

    Is it possible to change the orientation of attribute text? For example can the orientation of elevations shown when editing a linestring be oriented to a fixed position?    If it is currently not possible ...
    Marshall Cant
    last modified by Marshall Cant
  • Vertical Wall Creation

    Hi Alan Sharp - The current model I am building includes an MSE wall where the points are based off of another alignment so I do not have their locations just offsets, stations, and elevations. also, there is an...
    Buck Lawson
    last modified by Buck Lawson
  • Deleting Objects with Layer Manager open causing system instability

    More often than not, when deleting objects with the layer manager open (un-docked), the system hangs, then either the Layer Manager or the Program crashes. This is killing production as a restart of TBC is required to...
    Richard Tyndall
    last modified by Richard Tyndall
  • TBC v5.00.1 Patch released Jan 18, 2019 Not Running

    The TBC 5.01 patch is not running   it reports an error please check the installer
    Alexander Holsteinson
    last modified by Alexander Holsteinson
  • View Filter Manager - Right Click Suggestions

    It would be a big help and save a bunch of clicks if the following right click options were added for the view filter manager: Group Name - Right clicking on the Group Name in the View Filter Manager: Add option...
    Richard Tyndall
    last modified by Richard Tyndall
  • Generate Cross Sections from Surfaces

    I have these two surfaces : 1) RA2 Merged and 2) SBDOGL. I have a Horizontal Alignment. CL 0-75200. I need to generate Cross Sections at 10m intervals and publish them as AutoCAD files. Could some one help.   ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Error trying to do a VCL Export

    I keep getting an error message when I try to do a VCL export from my current project.  The VCL export works on my other projects.  I can't seem to get around this error.  I was able to do a DXF export ...
    Tysen Ellison
    last modified by Tysen Ellison
  • Exporting DXF - TBC 5.0 Bug

    I have run several tests and I believe there is a bug with the dxf export option in TBC 5.0.  The dxf file that is created is much larger than it should be.  I'm using the dxf_2000 option, but "dxf_2018" opt...
    Jennifer Metz
    last modified by Jennifer Metz
  • Edit out brush from a point cloud in TBC

      Here is how I reclassify brush in a point cloud using TBC.
    Matt Eklund
    last modified by Matt Eklund
  • Utility Module - Sanitary Sewer Laterals

    Is there a quick or easy way to create many sanitary sewer laterals (pipe runs) for a subdivision? Or is there a way to create one, then copy and edit for all? Or do nodes need to be created at each bend for each indi...
    Eric Schmeusser
    last modified by Eric Schmeusser
  • TBC v5.0 Selection Explorer behaviour differences

    I've noted a couple of differences with Selection Explorer that may or may not be by design:   I have Selection Explorer ‘stacked’ with the View Filter Manager and Project Explorer. Often when I sele...
    Rob Davidson
    last modified by Rob Davidson
  • Export Business Center Projects to VisionLink

    Trimble Business Center users now can create “Standard”-type projects to publish to VisionLink Administrator. Previously, a Civil Project Monitoring subscription was required in the VisionLink account to u...
    Stephen Benko
    last modified by Stephen Benko
  • Alternative Area Units in Smart Text Codes

    Is there a way to use the alternative area units in the project settings when creating smart text of an enclosed boundary?  In this case, we wanted to show the areas in acres. If not, we will need a code for...
    Karen Anne De Guzman
    last modified by Karen Anne De Guzman
  • Side Slope command connectivity

    I have been using the side slope command to create my curb and manually use the offset line command (from the back of curb line) to create my sidewalk. But whenever I make changes on my EOP line (reference l...
    Karen Anne De Guzman
    last modified by Karen Anne De Guzman
  • Announcement:TBC v5.00.1 Patch Released - January 18, 2019

    Kudos to the TBC crew! The Hotfix does NOT nuke all your customized settings like in previous versions. Thank you. Much appreciated.
    Marshall Cant
    last modified by Marshall Cant
  • Create Site Improvements with Slopes/Edge Properties

    Most of the projects I build models for require excavation and backfill that requires a slope. Instead of building my site improvements as offset sections based on layer width and average depth, is it possible to...
    Chase Swalling
    last modified by Chase Swalling
  • Workaround for plot problems?

    I have a problem with the plotting, sometimes and in some project it does not plot the things that is in the dynaview. I plot other things also. I know that this is a problem and that Trimble is working on a fix but i...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • Application Error in Ver 5

    I have a client that is getting this error (Error in the application) in Ver 5 when opening a CAD file. This same CAD file opens fine in Ver 4.12. We then saved the file out of Ver 4.12 and it then opens fine in Ver 5...
    Mike Tartaglia
    last modified by Mike Tartaglia