• Change Elevation

    I tried to change elevation of a Surface using the CAD>Edit>Change Elevation command, By a Delta Elevation of -0.50. While a message "Total Elevation Change" was displayed, the properties did not change.  ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • C3D Surface to Trimble Machine Control

    Hi everyone!   I have a surface that was created in C3D that I would like to load in a Trimble machine control unit and I have more than a few questions :-)        &...
    Charlie Mizo
    last modified by Charlie Mizo
  • Generate Cross Sections from Surfaces

    I have these two surfaces : 1) RA2 Merged and 2) SBDOGL. I have a Horizontal Alignment. CL 0-75200. I need to generate Cross Sections at 10m intervals and publish them as AutoCAD files. Could some one help.   ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • TBC 5.10 Corridor feature - 'Target Material Layer'

    Im working through some of the TBC tutorials regarding corridors and have completed the main 'working with corridors' tutorial shipped with the TBC help menu.  With the release of TBC 5.10 I see that Alan Sharp&...
    Rowan Bird
    last modified by Rowan Bird
  • Vertical Alignment From Surface Profile

      I intend to create a VAL from a Surface Profile of an Alignment and record it in a corridor by the same name.See attachments. I tried what Mr Alan suggested. Could not go through. Will some on hep please. ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • More corridor issues

      After doing all this, I am not still able to get All needed elevations in the Station Offset Report. Please see attached Excel file.         I tried to create a template couldn't quite g...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Custom Reports in TBC

    I am looking for a Custom Report in TBC that can give me information as in attached file. Could some one help find it or a video tutorial / Webinar Recording for learning about Creating Custom Reports.   I ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Modeling Tip - Use Side Slopes to clean up linework

    Cleaning up contours to elevate edge of pavement from can be a pain and tedious.      Here is a trick I found. I think it speeds up contour cleanup along edges of pavement, especially for site style ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Feature Request - Points Import

    When importing a .csv point file, it would be nice if we could select "new layer" in the pulldown menu asking what layer to import the points to.  That can then open the layer manager to create a new layer for th...
    MIchael Stallings
    last modified by MIchael Stallings
  • Transferring Points - from the Field to TBC and Back

    I am curious how other users handle points from the field software, both SCS900 and Siteworks or other, and the transfer between the field software and TBC. And potentially from TBC back to the field software.   ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Export Points with Layers

    I created points on different layers in TBC, and I want to be able to export all of them with their layer attributes in one point file and then import them into a data collector and have them go to their respective la...
    MIchael Stallings
    last modified by MIchael Stallings
  • KUDOs for development; Corridor table copy.

    What can I say? I'm a fan. Combined with Best and Across tolerance I don't see how it could be much easier. Big time saver. Most of the work is done in excel. And if you properly place the elevation view and create ...
    Richard Tyndall
    last modified by Richard Tyndall
  • Exporting a dem or tif file

    Is there a way for me to export a .dem or any .tif convertible file of my surfaces?    My workflow right now on producing such file is exporting my surface into a .dwg and recreate the surface using Autocad...
    Karen Anne De Guzman
    last modified by Karen Anne De Guzman
  • Create Grading (Conditional) Issue

    I was trying to create side slopes with some conditions. At one location I am getting some issues. The first instruction is not getting followed as desired for unknown reasons. I tried to edit the line string hoping ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Layer Manager Enhancement Request

    Would it be possible to make the column widths in Layer Manager adjustable (or auto-fit something like like Excel columns)? Then, make the adjusted column widths persistent so that when a particular project is re-open...
    Marshall Cant
    last modified by Marshall Cant
  • 2D Lines to 3D Linestring

    Creating a 3D Linestring using a Polyline drawn in Civil3D and a CSV file containing X,Y,Z values.   I generated a 3D line string using the XYZ values in CSV. The resultant 3D Linestring  does not register ...
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • How to cut design at level?

    Hi,   I have surface that i need to cut to certain level. It is a trench that top level needs to end at 1.5 m. Now the top of the surface varies. I tried it with merge surfaces, but the endpoint of the surface...
    Mikko Siivola
    last modified by Mikko Siivola
  • Interior Surface Edge Breakline

    enhancement request Alan Sharp   Looking for a method to clip a surface model as an interior edge breakline.  We receive surface models from outside sources that may need to be clipped and then add additio...
    Matt Voge
    last modified by Matt Voge
  • Follow up to text white out question

    enhancement request Alan Sharp   Enhancement request to have an option to create a border around text.
    Matt Voge
    last modified by Matt Voge
  • Plotbox Plotting in TBC

    There has been quite a bit of traffic by both email and through the forum on the issue of Printing to PDF using the Plotbox Function as a basis and the standard Print commands to run a Print to PDF Driver that provide...
    Alan Sharp
    last modified by Alan Sharp