• Earthworks Simulator in Windows 10

    Does anybody know how to run the earthworks simulator using windows 10?  Thank you
    Eric Condemilicor
    last modified by Eric Condemilicor
  • How do I create a trench template that benches out 800mm every 1.5m deep from surface.

    Every 1.5m deep I go, I have to bench 800m then go another 1.5m. My pipe is 3.5m deep, so I need 2 Benches. I have tried numerous iterations with differing results. Any tips appreciated-I have watched the Trench te...
    Wayne Heaslip (alternate)
    last modified by Wayne Heaslip (alternate)
  • GENIO .mos or .txt export?

    Is there anyway to export a GENIO .mos or .txt file from TBC? This is still a deliverable format for as constructed survey for some state departments here.   Rob
    Rob Davidson
    last modified by Rob Davidson
  • Smart Text - Change Date Display

    Hello!   I'm fairly new to the whole drafting module. I've been trying to create my own custom drafting template that includes our company title block and I was curious if there was an option to change how the d...
    Veronica Velazquez
    last modified by Veronica Velazquez
  • Utility Stakeout Issues

    How can I  inspect and stakeout all of the really cool stuff that I have created in the Utility Module? It seems like the Siteworks would be an awesome tool for this, especially the 3D view. How come this hasn't ...
    Shea Huckaby
    last modified by Shea Huckaby
  • Ned help with plans presenting differences from projected surfaces

    Hi!    I need your help here and i think there is a answer but i cant figure out how to do it and none of the videos for projected surfaces show med how to do it.    The job is to correct present t...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • Custom toolbar in TBC version 5.00

    Hello   Can somebody please tell me how to create custom side toolbars in the new UI of TBC v5.00? The workflow I used in BC-HCE doesn’t seem to work.   Thanks
    Joseph Torres
    last modified by Joseph Torres
  • bench template.vcl

    Tim McClannahan
    last modified by Tim McClannahan
  • Points command

    I frequently use both siteworks and TBC and sometimes I find that using the cogo function in siteworks I can create points faster in the collector than the computer. The create point and subcommands currently involves...
    Steven Lloyd
    last modified by Steven Lloyd
  • Color Mapping

    I often use color mapping templates that Alan posted a while back. I found that sometimes the max/min elevation sets itself to the elevations in my surface, and sometimes defaults to a different elevation (-174' min 1...
    Matthew Judice
    last modified by Matthew Judice
  • Projected surfaces cut n fill maps

    Hi!   Im trying to do a cut n fill map from 2 projected surfaces (with the same plane) but i only get some strange edgy c/f surface. Anuyone know what i am doing wrong here? I have done this before but that was ...
  • Troubleshooting TBC Installation Problems

    Installation and Operational Problems with TBC The following list are things that you can always try to resolve problems with TBC Installation or Operation. Below that you will find some typical support cases that ha...
    Alan Sharp
    last modified by Alan Sharp
  • Is there a way to create a best-fit profile based off a road surface?

    I've got a scanned road surface from which I want to derive a profile/vertical alignment so I can verify slopes and K-values along the road. I know I can elevate a linestring to the scanned surface and turn it into an...
    Mickey Kocemba
    last modified by Mickey Kocemba
  • Design export trouble after installing 5.1

    Hi!   Suddenly i cant create designs anymore. I have reinstalled TBC twice with no luck. Any ideas? 
    Fredrik Bergström
    last modified by Fredrik Bergström
  • how to share import format files (.cimp) in a network environment

    Is there really no way to share a set of import formats using a network drive?   In the program options I can set the target folders for drawing templates and export file formats, but the import formats are al...
    Ronny Schneider
    last modified by Ronny Schneider
  • Corridor by Phase

      We are begining to being ask to run earthwork quantities by Phase (road/highway projects).  I have found to add the subgrade material to another material to have a combine total subgrade surface.  Thi...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Bug - Offset Line Segment

    It seems that a linestring with VPI elevations does not offset correctly when only a segment of the linestring is offset. Please see video.    It appears that VPIs are added at random locations on the ...
    Nick Beachley
    last modified by Nick Beachley
  • Feature Request - Project Cleanup - Add info icon

    Could we add an info icon that shows what the circle filtering radius refers to? A nice little diagram.     I looked this up by hitting F1 and all you get is a text description.  I think this wo...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Elevation edit that does not move graphics

    I have created a surface for a cul de sac using arcs that were then given elevation to contour the Cul De Sac. The engineer has come back to modify the cul de sac raising it 1.5 feet and instead of sheeting at 2% ac...
    Kurt Crispin
    last modified by Kurt Crispin
  • Wireless

      Tablet settings     Sent from my iPhone  
    keith strong
    created by keith strong