• Scaling trouble

    Hi!   Since i updated to 5.3 i have som scaling problems and i dont know why. For example i have to multiply scale style with 100 to make lines show as they should and when switching to drafting lines are solid...
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • Projected surface - Area planimetric or actual?

    Hi!   I want to have the total surface in m2 of this model how do i do?  I have made an projected surface wich i cant do a report from. The way around this is to do a CF map from a non existing surface and...
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • FYI - Downloaded update to 5.32 and HASP driver

    FYI - installing 5.32 from the offline download is nuking the HASP drivers. You'll need to go through the HASP troubleshooting steps, including the purge, to get it squared away. We are 3 for 3 on having to do this so...
    Richard Tyndall
    last modified by Richard Tyndall
  • How can I export multiple alignments?

    I have a job with multiple alignments. Is there an export format that can capture all of those alignments where I can just drag and drop that one file into different models I'm building and have the alignments come in...
    Adam Bower
    last modified by Adam Bower
  • Point List / Report

    Hi    I have a lot of points in a project and I want to make a list of them and a report, but only part of them. I would like to select them by code or a layer that they are in. Is it possible?   Is t...
    Luboš Bejček
    last modified by Luboš Bejček
  • Can not see PDF plan sheet after its been geo referenced

    I am having a difficulty seeing a PDF plan sheet after placing it in my project. I have checked properties of the file to ensure the visibility is on and that it is not transparent. I am not sure what else to check. I...
  • corridor volumes based on surface needs improvement

    I've got a subgrade surface created from a finished level surface and site improvements applied. I can do an overall quantities report with the earthworks surface to surface report, but the engineers want it like a c...
    Ronny Schneider
    last modified by Ronny Schneider
  • Some feature requests

    Hi   I miss in menu "devide lines" - for devide by number of separated objects .... where I could set e.g. 5 parts same lenght as it is now or 5 parts each diffrent lengh, there could be fields for the setting t...
    Luboš Bejček
    last modified by Luboš Bejček
  • TBC 5.32.1 Slow to save

    I'm suddenly finding TBC v5.32.1 is taking an unbearably long time to save projects.  This seems to be regardless of project size.  I have tried with existing and new projects, but when clicking save, the cu...
    Stevie McCafferty
    last modified by Stevie McCafferty
  • Cancel command for TBC?

    As a Civil 3D user, I find it very frustrating that TBC doesn't include a "Cancel" command. Is there any way to include a "Cancel" command keybinding to the ESC key?   The video below shows that in order to clea...
    Nicholas Nikula
    last modified by Nicholas Nikula
  • Bug - surface is not forming if line elevation is exactly zero

    I believe that shouldn't be like that. I've got a line set to exactly zero (not undefined) and the surface doesn't form. Only if I set the line a little bit different than zero.
    Ronny Schneider
    last modified by Ronny Schneider
  • OFFSET LINE (command) - Right Click Controls

    Can we please get the right click controls conformed, similar to the the majority of the others, by adding the Apply, Close, Close All shortcuts? Thanks.  
    Richard Tyndall
    last modified by Richard Tyndall
  • Account Suspended?

    Anyone else have this message on the start up page today?
    Thomas Mauriello
    last modified by Thomas Mauriello
  • Enhancement Request: Snap keybind/master switch

    I always use snaps. More often than not, I have one or more on at all times. After working in the industry for some years now, I've come to realize that I'm a part of a minority group of always-on snappers.   Th...
    Tyler Lindsay
    last modified by Tyler Lindsay
  • Trench surface at invert elevation?

    TL;DR Is it possible to specify a trench surface to be created at flowline, rather than bottom-of-pipe? (using the utility module)   More context By default, the utility module in TBC creates trench surfaces a...
    Tyler Lindsay
    created by Tyler Lindsay
  • Utility Module Enhancement Request (Snap to structure face)

    It appears that TBC only supports utility lines snapping at the center of utility nodes. I'd be happy to hear if this is not the case. I understand that this functionality makes it simpler to create utility designs, a...
    Tyler Lindsay
    last modified by Tyler Lindsay
  • Cut Fill Grid Density

    When creating a cut fill map I am getting the message that the grid is too dense and cannot be displayed.  I have to extend the grid spacing all the way out to 60 before the cut fill text will show up.  Is t...
    Brandon Barnum
    last modified by Brandon Barnum
  • Disappearing Buttons

    I have an issue that seems to be a personal issue, with various portions of the macro commands disappearing off the screen after moving the mouse cursor over them.  This has been happening for several years now, ...
    Wayne Welshans
    last modified by Wayne Welshans
  • VCL Alignments in Siteworks Not Staking Random Elevation

    I'm having an issue using VCLs with Siteworks. When we open alignments in Siteworks, and stake the alignment on elevation, custom elevation (just like we do PROs), while on random, it does not pull the new alignment e...
    Adam Bower
    last modified by Adam Bower
  • Need for a block editor

    I think there is a big need for a block editor in TBC.    I have run into a few cases where I would need to make a modification to a block and currently in TBC the only way to do so is to explode the block ...
    Patrick L'heureux
    last modified by Patrick L'heureux