• Solid hatch black is not black

    Trying to fix up my title block and I can't figure out how to get solid hatching to be darker. It appears to be screened back or maybe transparency is set to 50%. Color of hatch is black, but appears gray on screen, i...
    Thomas Tomsu
    created by Thomas Tomsu
  • FXL Process Re-Layer

    I have experienced a problem when I relayer my lines and point after doing a "Process Feature Codes".  I relayer all my lines and point even thou my FXL has specific layers onces processed.  We do a bit of t...
  • Alignment Report Using PI Stations

    We use a online plan app that we upload our alignments.  The alignments are in CSV format and the PI N/E with radius is used.  For tangent lines only need the N/E.  The Geometry Report comes close, I wo...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • TBC Flat Alignment Image

    Is it possible to flatten the alignment to create a schematic image/drawing   Something like below
    Gavin Jones
    last modified by Gavin Jones
  • Which TBC Edition/Module Do I Need To Model a Penstock?

    I have to model a 3.1m diameter Penstock that is basically encased in a concrete structure with an additional 2 conduits running beside it that are also encased in the same concrete structure. The Penstock has several...
    Marshall Cant
    last modified by Marshall Cant
  • Copy Corridor Table ?

    Trying to wrap my head around an issue with coping table in corridor.   When I copy a offset/slope table,  the slope gets copied in the VC Length column.  What am i missing to get the slope in the ...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • How to lock two plan view tabs together?

    Hi,    I'd like the Plan View to be centred on the same point in both views, if I choose to Pan or Zoom in one tab, the same operation would be performed in the other tab.   Is it possible, while work...
    Marian Plucinski
    last modified by Marian Plucinski
  • tbc

    Hi I have version 3.40 TBC. My question is. J, export my klm polygon with the numbers at each vertex in google earth numbers are not displayed possible to send me a solution   Best regard.   yvon Laurin
    yvon laurin
    last modified by yvon laurin
  • Can I import either a Terramodel or DXF Plan Sheet as  Plan Template?

    I've got a Plan Form I've been using in Terramodel - can I  import this into TBC as a Drafting Template ?  Either "natively" or by DXF?
    John Mill
    last modified by John Mill
  • Vertical Design - Support for Blocks

    Any intentions of supporting blocks in the vertical design tool? I have some ideas where this would be very useful and save a ton of time   enhancement requests    
    Patrick L'heureux
    last modified by Patrick L'heureux

    Would it be possible to highlight the line activity in the gant view (and have an option to change the color preference & opacity )  
    Gavin Jones
    last modified by Gavin Jones

    Anybody know if TCC is down?
    Ben Ryschon
    last modified by Ben Ryschon
  • Mass Haul Reverse Direction

    I am creating a Mass Haul with TBC. For constructability reasons we are starting from the the end of the chainage instead of the Start. Is there any way I can illustrate my mass haul to show excavation 0m3 at the end ...
    Karla Firth
    last modified by Karla Firth
  • Selection Set - Unassigned Objects - Explode removes link to import file

    I have notice there is a significant amount of objects that get unassigned when running the explode command on blocks and mtext.   Would it be possible to keep these objects associated to file they were imported...
  • Feature Request - Right Click - Isolate/ Unisolate Layer

    I think the isolate/unisolate toggle would be a great right click option and save some back and forth on the screen.   enhancement request   Thank you for consider!  
  • Dynaviews not plotting point symbols

    Issue with Dynaviews  If you create a point label with a symbol, PT#, Elev, Desc and display it from a plotbox into a Dynaview, the symbol does not appear.  The only way I can get this into a document is t...
    Ron Ciccarone
    last modified by Ron Ciccarone
  • TML or Feature Request - Utility - Distribute Slope along Run

    When designing gravity runs, it would be very useful to have a tool that would allow you to select runs and distribute a desired slope.   Controls: Start Invert elevation End Invert Elevation Select Run to Ap...
  • Utilities - Create Utility Line from Linestring - Creates a line on layer 0

    I just noticed that when you use the create utility line from linestring command, it creates a duplicate line on layer 0.   Why? It doesn't appear to be tied to the utility run except with the selection set. Doe...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Drawing 2 Best Fit Arcs with No Straight Section

    Is there a simple way to draw 2 best fit arcs with no straight section back to back? I could be missing something but there seems to be now way to tell the program that you want to do another best fit without having a...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Surface - Swap Triangle lock/save

    Is there a way to lock or save the surface after doing a swap triangle work so it won't go back to the original after rebuilding the surface?
    Eric Condemilicor
    last modified by Eric Condemilicor