• How to lock two plan view tabs together?

    Hi,    I'd like the Plan View to be centred on the same point in both views, if I choose to Pan or Zoom in one tab, the same operation would be performed in the other tab.   Is it possible, while work...
    Marian Plucinski
    last modified by Marian Plucinski
  • tbc

    Hi I have version 3.40 TBC. My question is. J, export my klm polygon with the numbers at each vertex in google earth numbers are not displayed possible to send me a solution   Best regard.   yvon Laurin
    yvon laurin
    last modified by yvon laurin
  • Can I import either a Terramodel or DXF Plan Sheet as  Plan Template?

    I've got a Plan Form I've been using in Terramodel - can I  import this into TBC as a Drafting Template ?  Either "natively" or by DXF?
    John Mill
    last modified by John Mill
  • Which TBC Edition/Module Do I Need To Model a Penstock?

    I have to model a 3.1m diameter Penstock that is basically encased in a concrete structure with an additional 2 conduits running beside it that are also encased in the same concrete structure. The Penstock has several...
    Marshall Cant
    created by Marshall Cant
  • Vertical Design - Support for Blocks

    Any intentions of supporting blocks in the vertical design tool? I have some ideas where this would be very useful and save a ton of time   enhancement requests    
    Patrick L'heureux
    last modified by Patrick L'heureux
  • TILOS IMPROVEMENT REQUEST HIGHLIGHT ACTIVITY SELECTED 

    Would it be possible to highlight the line activity in the gant view (and have an option to change the color preference & opacity )  
    Gavin Jones
    last modified by Gavin Jones
  • HEY IS TCC DOWN?

    Anybody know if TCC is down?
    Ben Ryschon
    last modified by Ben Ryschon
  • Copy Corridor Table ?

    Trying to wrap my head around an issue with coping table in corridor.   When I copy a offset/slope table,  the slope gets copied in the VC Length column.  What am i missing to get the slope in the ...
    Francisco Guerrero
    last modified by Francisco Guerrero
  • Selection Set - Unassigned Objects - Explode removes link to import file

    I have notice there is a significant amount of objects that get unassigned when running the explode command on blocks and mtext.   Would it be possible to keep these objects associated to file they were imported...
  • Feature Request - Right Click - Isolate/ Unisolate Layer

    I think the isolate/unisolate toggle would be a great right click option and save some back and forth on the screen.   enhancement request   Thank you for consider!  
  • Dynaviews not plotting point symbols

    Issue with Dynaviews  If you create a point label with a symbol, PT#, Elev, Desc and display it from a plotbox into a Dynaview, the symbol does not appear.  The only way I can get this into a document is t...
    Ron Ciccarone
    last modified by Ron Ciccarone
  • TML or Feature Request - Utility - Distribute Slope along Run

    When designing gravity runs, it would be very useful to have a tool that would allow you to select runs and distribute a desired slope.   Controls: Start Invert elevation End Invert Elevation Select Run to Ap...
  • Utilities - Create Utility Line from Linestring - Creates a line on layer 0

    I just noticed that when you use the create utility line from linestring command, it creates a duplicate line on layer 0.   Why? It doesn't appear to be tied to the utility run except with the selection set. Doe...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Drawing 2 Best Fit Arcs with No Straight Section

    Is there a simple way to draw 2 best fit arcs with no straight section back to back? I could be missing something but there seems to be now way to tell the program that you want to do another best fit without having a...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Surface - Swap Triangle lock/save

    Is there a way to lock or save the surface after doing a swap triangle work so it won't go back to the original after rebuilding the surface?
    Eric Condemilicor
    last modified by Eric Condemilicor
  • Feature Request - Utilities - Create Utility Run

    Please consider adding a toggle that would allow you to create nodes at vertices for long linestrings.    You could explode this line (which is now easy thanks to the explode line tml) and select all of the...
  • Feature Request - Drafting - Print Plan Set - Add Sheet Set Name Column

    Please consider adding a sheet set column name, the ability to hover over a sheet and see which sheet set this sheet is associated to, or a group header.   This would be very useful when working on projects with...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Mass Haul Diagram - Quick Print

    Is there a way to quickly print a mass haul diagram or a plan set template that I can set up? Something similar to the profile template would be great.     I tried to print one using the built in tutor...
  • Feature Request - Utilities - Show utilities in corridor template editor

    Please add the ability to view utilities in the corridor template editor.    This would be very useful for estimating, designing and general purposes.      enhancement request  
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Vertical design Instructions - SLows down switching between views

    I have notice that when you have a good amount of vertical designs instructions, TBC greatly slows down on loading views with these on and when turning on the vertical design layer. In this project I have over 600 ins...