• Raster image wont show in planset, again

    Hi!   I have had this problem earlier but with just some pictures, it does not matter if its .jpg or .png. I did get it to work in my earlier planset ( i dont know how) but now the problem is back again.   ...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • XS plans displays wrong colour, how do i remove that?

    Hi!   Look at the picture. I have cut and fill area as a text in my XS drawings and also painted it red and blue. But when the 2 surfaces crosses each other the fill is grey and when there is a gap between the i...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • Can I use an enclosed linesting to select a portion of a point cloud?

    I want to use a closed linestring that represents the outer boundary of my design, select the points from a point cloud within this, and add these to a new region so that I can shut them off.   Create a short of...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Hidden UCS geometry from imported DGN file?

    I have imported a designer .dgn file.  Cleaned it up and sent the .dxf linework file out to the field.  I then get this picture from my guys. Here is that same line before he selects it:     ...
    Tysen Ellison
    last modified by Tysen Ellison
  • Issue Importing Files

    Hello,   I have 3 Trimble DC files that I am trying to upload using Trimble Business Center v4.12   I receive the attached error when I try and upload any one of the 3.   I have also attached one of ...
    Greg Hurd
    last modified by Greg Hurd
  • Missing Data when importing a Xref Block

    I tried importing a dwg that contained what appears to be a xref block and noticed I was missing data in TBC. I went back to the original dwg with Civil3D, exploded the block, and reimported into TBC and I was able to...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Where can I find point metadata from an spj?

    Is there a place that I can find point metadata in TBC?   Items such as: Operator Name Time Date Target Height     If these are not available in TBC can we please make them?    I am currently ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Profile table

    How do i adjust so my profile table wont be int the grid? If i change the scale it will be better but other things f*** up. Sometimes tje lines are below the grid and sometimes the grid is in the table. How do i fix t...
    Fredrik Bergström
    last modified by Fredrik Bergström
  • Text White Out Size

    Alan Sharp   Is there a setting to increase the text white out size?
    Matt Voge
    last modified by Matt Voge
  • Converting a .mch file to an older version for a CB460

    Is there a way to use TBC-HCE 5.0 to convert a .mch (machine control) to use an older version of firmware.  In otherwords, if the original file was built in a CB460 on version 13.10, and it may need to go on a CB...
    Robert Stallings
    last modified by Robert Stallings
  • Grid Only Points in 5.1

    I would just like some clarification on the new create point options in TBC 5.1.  In past versions we had to import our control points from a csv file so that we could set them as "grid only" so that they would n...
    Ben Ryschon
    last modified by Ben Ryschon
  • Feature Request - Object Explorer for Drafting

    I think it would be beneficial to have some type of object explorer in drafting or have the ability to select a object in edit mode and see the properties of the object, such as its layer. It would be useful if the to...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • TBC 5.1v Locks-Up during export function

    TBC 5.1v Locks-Up during export. After the export dialog opens, the software freezes up causing me to use the task manager to close the program. Has any one else ran into this issue? If so, please let me know if the...
    Brian Van Pelt
    last modified by Brian Van Pelt
  • Does anyone know how to delete "ghost" VPI's? They only show up when you toggle line markings, but they act as VPI's and are no able to be edited in the VPI editing window.

    last modified by JEFF GONZALEZ
  • Start TBC with different "options"-file

    Normaly I work in my office, so I have access to my network and server. Then TBC uses the files from the mapped drive. But sometimes I don't have access to the network, so TBC can't find the network-drive an I get som...
    Titus Emanuel
    last modified by Titus Emanuel
  • Point Cloud Export Error

    I received this error message when trying to export a point cloud as a rcp file type.   Is there a way to test the cause of this?    
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Slope arrows to EarthWorks, possible?

    Is the a way to get the slope arrows on a surface to show in EarthWorks, export them in any way? Or is there a fast way to place slopearrows on a surface (not manual) wich i can export?
    Fredrik Bergström
    last modified by Fredrik Bergström
  • I am trying to use drafting for a simple plan sheet, my sheet is always blank

    Good morning,   I am trying to do a drafting sheet for a simple site.  I just want to have one plan view.   No matter what template I try to use when I make a new sheet view everything is blank.  ...
    Robby Stein
    last modified by Robby Stein
  • Is there a way to create a custom table?

    I know I can create a table for points, polygons, and lines. But what about when I want to create a table with different information to display in TBC for plotting purposes as part of a planview? For instance Cut/Fill...
    Elaine Cairns
    last modified by Elaine Cairns
  • Pointcloud from SX10 or BC-HCE to Sketchup, is that possible?

    Does someone have a video for an workflow to use pointclouds in sketchup collected from a SX10 and exported from BC-HCE?  Or maybe it doesent work to do that? It is an extension in sketchup (Trimble scan explore...
    Fredrik Bergström
    last modified by Fredrik Bergström