• Create Side Slope Malfunction

    Hello, when using create side slope command the curb line breaks in curves end up overlapping creating errors. Using TBC 5.31. Tried tightening up the sampling distance. Offset line command has no overlapping problem...
    Thomas Mauriello
    last modified by Thomas Mauriello
  • Why will my .dwg file show up in 3D view but not plan view?

    I am trying to import a .dwg file into a new job, and if I open up the 3D view I can see all of the data in the file, or at least I think its everything. However, when I switch to the plan view I only have a blank scr...
    Peter Vigneri II
    last modified by Peter Vigneri II
  • Merge Numerous Duplicate Points

    I am working on creating an original ground surface.  I have a single .vce file that was created by importing the .spj files from the data collectors used to record the surface.  There are very many duplicat...
    Wayne Welshans
    last modified by Wayne Welshans
  • Surface Classification

    What`s the different between each surface calssification (surface properties)? I can`t find any information about it. How it helps in workflow or maybe there are diferrences in computing the volumes or any others acti...
    Marcin Klamczynski
    last modified by Marcin Klamczynski

    Alan Sharp   I'm having problems converting the cross-section, not sure what I'm doing wrong   CAD Data have been relayered Vertical Datum Set Up Horizontal Datum Set Up Alignment Set Up   Scale i...
    Gavin Jones
    last modified by Gavin Jones
  • Modify / Copy CAD Line Style

    Can you modify & save the CAD line style which can in from an external drawing. 1. how to modify / copy this line style 2. can this line style be saved to a Trimble library for reuse  
    Gavin Jones
    last modified by Gavin Jones
  • Can you use DJI flight software and drone to create point cluds in TBC?

    I was wondering if anyone out there has or is using a DJI P4 rtk drone and DJI flight software to fly missions and then bring that info into TBC for processing point clouds, ortho photos and such?  If so is there...
    Ben Ryschon
    last modified by Ben Ryschon
  • is possible to convert a flight mission from a dji to .jxl format file for TBC?

    Good day,   I have to generate a point cloud from different pictures taken by a dji. I have to create an ortophoto mosaic data, generate the 3d surface and finally calculate the volume (I have to do all these op...
    Stefano Ruben Presezzi
    last modified by Stefano Ruben Presezzi
  • Line StyleManager - Export Styles

    Is there a way to export line styles out of a TBC project? I had gone through and finely tuned a bunch of styles but it looks like the file I created got misplace or overwritten. I would rather not start from scratch ...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Feature Request - Selection Sets - Vertical design Containers

    Please consider adding vertical design containers to selections sets. These would consist of the following components that make up a vertical design: Child Lines Instructions Surface ( if one is created) Contours ...
  • Scaling trouble

    Hi!   Since i updated to 5.3 i have som scaling problems and i dont know why. For example i have to multiply scale style with 100 to make lines show as they should and when switching to drafting lines are solid...
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • Can not see PDF plan sheet after its been geo referenced

    I am having a difficulty seeing a PDF plan sheet after placing it in my project. I have checked properties of the file to ensure the visibility is on and that it is not transparent. I am not sure what else to check. I...
    Patrick Vradenburg
    last modified by Patrick Vradenburg
  • Projected surface - Area planimetric or actual?

    Hi!   I want to have the total surface in m2 of this model how do i do?  I have made an projected surface wich i cant do a report from. The way around this is to do a CF map from a non existing surface and...
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • How can I export multiple alignments?

    I have a job with multiple alignments. Is there an export format that can capture all of those alignments where I can just drag and drop that one file into different models I'm building and have the alignments come in...
    Adam Bower
    last modified by Adam Bower
  • Point List / Report

    Hi    I have a lot of points in a project and I want to make a list of them and a report, but only part of them. I would like to select them by code or a layer that they are in. Is it possible?   Is t...
    Luboš Bejček
    last modified by Luboš Bejček
  • Bug - surface is not forming if line elevation is exactly zero

    I believe that shouldn't be like that. I've got a line set to exactly zero (not undefined) and the surface doesn't form. Only if I set the line a little bit different than zero.
    Ronny Schneider
    last modified by Ronny Schneider
  • OFFSET LINE (command) - Right Click Controls

    Can we please get the right click controls conformed, similar to the the majority of the others, by adding the Apply, Close, Close All shortcuts? Thanks.  
    Richard Tyndall
    last modified by Richard Tyndall
  • Account Suspended?

    Anyone else have this message on the start up page today?
    Thomas Mauriello
    last modified by Thomas Mauriello
  • Cut Fill Grid Density

    When creating a cut fill map I am getting the message that the grid is too dense and cannot be displayed.  I have to extend the grid spacing all the way out to 60 before the cut fill text will show up.  Is t...
    Brandon Barnum
    last modified by Brandon Barnum
  • VCL Alignments in Siteworks Not Staking Random Elevation

    I'm having an issue using VCLs with Siteworks. When we open alignments in Siteworks, and stake the alignment on elevation, custom elevation (just like we do PROs), while on random, it does not pull the new alignment e...
    Adam Bower
    last modified by Adam Bower