• Work Order Viewer Bug?

    Hey Guys,   one of our customer has trouble with the Work Order Viewer. We don't use it so I need your help. He told us that TBC doesn't get the preview right, when he tries it in Siteworks it works fine.  ...
    Luca von Holzen
    created by Luca von Holzen
  • Cannot understand why 2 linestrings will not join

    I am trying to join to linestrings at the intersection in the red circle below in my project file but it says the 2 lines support joining but cannot. Can anyone help with this? I am currently using version TBC 5.30
    Tom Silicato
    last modified by Tom Silicato
  • SX10 and TBC as a dedicated Roads Survey Solution

      Hi guys,   I'm looking for "power users" on the SX10 and TBC as a Roads Survey solution. I would like to have a one on one session to discuss some of our findings and also discuss best practices when usi...
    Gustav Fick
    last modified by Gustav Fick
  • TBC Site Calibration Issue "GNSS base points [1000] are not derived from global GNSS positions"

    Please help, I keep getting the following message:   "GNSS base points [1000] are not derived from global GNSS positions; therefore, GNSS points measured from these base points are not available for the site ca...
    Kevin Clarke
    last modified by Kevin Clarke
  • Support Bulletin for Trimble Office Software - Community Base Station Update 3 November 2020

    Hello all,   If you experience issues post-processing data using the affected base stations, it may be due to the base station ephemeris data failing to download as it is still trying to use the outdated URL host...
    Jeffrey Ryan
    last modified by Jeffrey Ryan
  • Is it possible to perform Clash detection in TBC?

    I was wondering if TBC has Clash detection abilities built in or can I access Trimble Connect for cloud solution for Clash detection from within TBC?
    Saif Bin Darwish
    created by Saif Bin Darwish
  • GPS Pathfinder Office - coordinate system database issue

    Has anyone had an issue with GPS Pathfinder office where it would not update the coordinate system database and files when you updated the office software to a newer version?   Is there any fix or patch?
    John Alexander
    created by John Alexander
  • Precise Orbit download fail in TBC

    In trying to download precise orbits using the "Internet Download" tool in TBC, I get a message about an error occurring "while trying to log in to cddis.nasa.gov", stating I should check my username and password (see...
    Marianne Okal
    last modified by Marianne Okal
  • S8 BS/FS Distance differences of up to 5mm @100m when measuring to reflective tape or surface but not prism?

    As the title says im getting significant differences at times with my BS/FS when measuring to an effectively perpendicular surface, and i cant figure out the cause. The key points here:   done a comp calib, hz, ...
    Angus Keane
    created by Angus Keane
  • In Trimble  Access how do you inverse between the endpoints of 2 separate lines?

    In Trimble Access how do you inverse between the endpoints of 2 separate lines? (From a linked dxf file)
    Chris Webster
    last modified by Chris Webster
  • Why when I DXF export a points file the attributes come in as metric and the properties show the points in US Units?

    When I complete a survey we often DXF Export to an AutoCAD file and the point attributes come in with metric values but the properties show US properties.  How can I resolve?? 
    Kevin Wendell
    created by Kevin Wendell
  • How to get money off Cash app without card on a cell phone?

    Cash app makes your exchange simple from your cell phone. Thus, to realize how to get money off Cash app without card, you have to guarantee that you didn't attempt to utilize any pre-loaded card there. Further, ...
    Emma Emily
    created by Emma Emily
  • Discrepancy in TRM55971.00 antenna calibration

    Hey Everyone, I'm just wondering if anyone else out there has noticed a discrepancy in the vertical phase offset in the Zephyr 2 Geo antenna (TRM55971.00 NONE)? The label on the bottom has it at 8.564cm, the Trimble...
  • Exporting Data

    Hello,    I'm trying to export data within the Trimble Connect account to my email as a csv file. I have exported numerous times; however, I'm trying to export the full 148 assets. After inputting everythin...
    Cole Thompson
    created by Cole Thompson
  • DragnDrop Cad line with keys

    Hi all.   I have found that I can use shift-key while DnD end-point (or other points in the cad-line) and it guides me only in 90% direction (XY) move from that point.  DnD+CTRL-key helps to move the whole...
    Luboš Bejček
    last modified by Luboš Bejček
  • Quicker V10

    Good afternoon, We own a V10 and we use it mostly to record the state of the site from time to time. One of the things that stops us to use it more is that it is a bit slow. I wonder if now that Trimble rolled out th...
    William maestre larrad
    last modified by William maestre larrad
  • JOB file from TSC7 cannot export Design coordinates by Stakeout

    I have a JOB file was create as a new file with GNSS template. After a open this project I import CSV file as a grid points (ID, East, North, Elevatin, Note). After working with this points by stakeout its I can expor...
    Evžen Hlavica
    last modified by Evžen Hlavica
  • Query Elevation on Isopach

    Can anybody recommend an easy way to query the elevation value on an Isopach, anywhere on the surface not just at the triangle vertices?
    Richard Selby
    last modified by Richard Selby
  • S9 suddenly froze and disconnected. Possible corruption of file.

    I was using my S9 and TSC7 to do some basic monitoring which included shooting retro targets. During the monitoring, the instrument would not respond to me turning the screws on the side to aim it. The controller then...
    Jody Savage
    last modified by Jody Savage
  • I am unable to use 0,0 in my local site settings in TBC 5.3 when projecting from grid to ground. Is anyone else having this issue. I haven't had any problems using 5.1 and earlier.

    I have always used 0,0 in my local site settings when projecting from grid to ground using NAD83 State Plane Coordinates. In TBC 5.3 it now states my "projection is out of bounds" when trying to apply these setti...
    Sean Shropshire
    last modified by Sean Shropshire