Hello,
I am trying to rerun many missions/projects using batch processing through the command prompt in order to update Primary Lever Arms and GAMS values. However, even if I specify Primary level arms and GAMS values in the XML, it runs with the values in the values recorded in the T04 files. In the actual interface it will allow me to change and rerun the projects but I have far too many projects to update and run that way. Any suggestions on how to force the values in the .posbat to override?
Here is an example of what one project in my XML might look like:
<?xml version="1.0"?>
<Batch xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Project>
<Name>Kohala_Reroute_truez_test_20260817_0330-1140</Name>
<Kernel>Mission 1</Kernel>
<Extract>
<FirstPosFile>G:\path\to\first.T04</FirstPosFile>
<LastPosFile>G:\path\to\last.T04</LastPosFile>
<StartTimeTotalSec>0</StartTimeTotalSec>
<StopTimeTotalSec>999999</StopTimeTotalSec>
<OverrideDefaultAntenna>false</OverrideDefaultAntenna>
<AntennaManufacturer>Applanix</AntennaManufacturer>
<AntennaType>540AP (AT1675-540TS)</AntennaType>
</Extract>
<Process>
<GnssMode>INFusionPlus_PPRTX</GnssMode>
<GnssNavType>None</GnssNavType>
<MultipathType>LOW</MultipathType>
<CustomSettings>
<PriGNSSLeverX>-3.014</PriGNSSLeverX>
<PriGNSSLeverY>1.165</PriGNSSLeverY>
<PriGNSSLeverZ>-9.409</PriGNSSLeverZ>
<PriGNSSLeverSD>SDLessthan3cm</PriGNSSLeverSD>
<RefToIMULeverX>-0.135</RefToIMULeverX>
<RefToIMULeverY>0</RefToIMULeverY>
<RefToIMULeverZ>-0.085</RefToIMULeverZ>
<GAMSBaselineVectorX>0.013</GAMSBaselineVectorX>
<GAMSBaselineVectorY>2</GAMSBaselineVectorY>
<GAMSBaselineVectorZ>-0.013</GAMSBaselineVectorZ>
<GAMSLeverArmSD>SD1cm</GAMSLeverArmSD>
<GnssReceiver>Primary</GnssReceiver>
<IncludeHighRate>false</IncludeHighRate>
<IncludeRinex3>true</IncludeRinex3>
<AutoCalibratePrimaryGNSSLeverArm>false</AutoCalibratePrimaryGNSSLeverArm>
</CustomSettings>
<AutoSelectDownload>false</AutoSelectDownload>
<EnableGamsIfAvailable>true</EnableGamsIfAvailable>
</Process>
<Export>
<CustomSettings>
<OutputFile>G:path\to\sbet.out</OutputFile>
<OutputFormat>Custom Smoothed BET UTC</OutputFormat>
<ExportSolutionInUse>Postprocessed</ExportSolutionInUse>
<LeverX>0</LeverX>
<LeverY>0</LeverY>
<LeverZ>0</LeverZ>
<Tx>0</Tx>
<Ty>0</Ty>
<Tz>0</Tz>
<HeightOptions>Ellipsoid</HeightOptions>
<HeightOutputWGS84>false</HeightOutputWGS84>
<CoordinateUnits>Meter</CoordinateUnits>
<LatLonUnits>DegDecimal</LatLonUnits>
<Ellipsoid>WGS84</Ellipsoid>
<Datum>ITRF2014</Datum>
<TargetEpoch>2014</TargetEpoch>
<UseMissionEpoch>false</UseMissionEpoch>
</CustomSettings>
</Export>
<TemplateFile />
</Project>
<Version>4.0</Version>
</Batch>
------------------------------
Caroline Raiford
------------------------------