• Select all points with Media Folder

    This may not need to be a macro but may be the perfect scenario for one:  we are trying to export all points that have media folders attached, and include the media folder in the export to google earth.  The...
    Dean Teska
    last modified by Dean Teska
  • Parabola for Bridge Grades

    I had a guy ask me for an easier way to put Dead Load Deflections into his elevations for bridge beams. So theoretically you would select a line, calculate a spacing either by interval or dividing it by an equal numbe...
    Shea Huckaby
    last modified by Shea Huckaby
  • How the classification algorithm work behind the TBC version 5.0?

    Hello, I have question about Pole classification using TBC version 5.0 I have MLS data (refer into figure), I want to detect pole but the pole cannot be detected as well. Anyone know how the algorithm work behind the...
    Atika Marwati
    last modified by Atika Marwati
  • Calling TBC Command from custom Macro

    Hi,   I've just started with Macros SDK in Trimble Business Center and I'm struggling a bit to find any learning material. I was wondering if it's possible to call an existing command from my python macro?...
    Grzegorz Piotrowski
    last modified by Grzegorz Piotrowski
  • TBC macros - documentation, printout etc

    Hello,   Im quite new to TBC macros and im not very used to working with MS visual Studio. Can i try my macros without launching TBC? It takes a while to restart tbc after every edit   Is there a documen...
    witold urbas
    last modified by witold urbas
  • Trimble Connect for HoloLens v 3.1.1 - Release Notes - July 2020

    Hello Everyone,   Trimble Connect for HoloLens v 3.1.1 is now available in the Microsoft store and can be downloaded on to your XR10s/Hololens 2. The focus of this release is to improve the QR Login process for ...
    Sree Ceemalapati
    last modified by Sree Ceemalapati
  • Revenant Going Indie (again!)

    Hello (again!) from Revenant Solutions!   It has been a long time since our first hello, and sadly, we've been fairly quiet on the forums.  Like the rest of the world, we have been trying to navigate t...
    Quan Mueller
    last modified by Quan Mueller
  • feature request - macro "offset surface"

    I would like to extend the "offset suface" macro to include the possibility of calculating the new surface perpendicular to the old surface. If the slopes have different inclinations and you have to apply the same lay...
    Titus Emanuel
    last modified by Titus Emanuel

    Well I need to go back to a job that I have archived in WM but I a little confused on how to do this.  Is there any documentation explaining how to do this?   Thanks,   Ben
    Ben Ryschon
    last modified by Ben Ryschon
  • TML Developer - Revenant Solutions

    Revenant Solutions LLC is an independent software developer based in Westminster, Colorado.   After developing Business Center - Heavy Construction Edition for 12 years, Revenant Solutions was formed in 2018 to p...
    Quan Mueller
    last modified by Quan Mueller
  • S6 data output through com port

    I have an S6 and want to output a data stream to a computer. The instrument has two ports, one labeled 12V and one labeled COM. I have a serial cable 53002021. So I connect the cable from the S6 to a laptop running re...
    John Hamilton
    last modified by John Hamilton
  • EC520 Crash

    Is there any reason as to why when we update some Earthworks systems that it crashes the EC520. But when we go out the next day to swap with a new one the old one that crashed is working perfectly fine. We have had 2 ...
    Stephen Miraglia
    created by Stephen Miraglia
  • Tip of the Week #42 - TBC Point Symbols in AutoCAD

    Did you know you can use the *.SHX file to assure that your point symbols used in TBC translate exactly into AutoCAD?  Thanks to Evelina from TBC’s QA team, here’s how...   Symbols can be a...
    Joe Blecha
    last modified by Joe Blecha
  • Tip #117: Release Notes Shortcut

    Good morning TBC’ers! Have you ever installed a new version of TBC and wished you could easily pinpoint new commands or enhancements? Well today I will be showing a quick shortcut in TBC to access Release Notes....
    Erin Johnson
    last modified by Erin Johnson
  • TBC Tips

    Here you'll find all TBC Tips linked and accessible for viewing (and re-viewing!): To download a PDF containing all below tips (as of April 1, 2019) click here.   Field Data #4 - Spreadsheets - February 20...
    Joe Blecha
    last modified by Joe Blecha
  • Trimble Earthworks simulator, where to download?

    i have been searching everywhere (probably not but it feels like it) and i cant find the latest emulator for Trimble Eartworks for installation on my PC. Is there a place on trimble community where i can find this? 
    Fredrik Bergstrom
    last modified by Fredrik Bergstrom
  • WorksManager Release Notes - Jul 31, 2020.pdf

    Vijay Raghunathan
    last modified by Vijay Raghunathan
  • Understanding and applying Scale Factors in Scanning Workflow in TBC

    Hi all, wanted to share that useful technical content with you guys which might become more and more interesting nowadays.   White Paper - Understanding and applying Scale Fators in Scanning Workflows in Trimbl...
    Steven Witte
    last modified by Steven Witte
  • importing Sokkia total station data in TBC 5.2

    Hi all. Has anyone the right script to import in TBC data from a Sokkia total station? We would to use TBC for all our survey jobs. Many thanks to anyone would help us. 
    Gabrio Rossi
    last modified by Gabrio Rossi
  • Can't see the Project In trimble Connect HoloLens 2nd gen

    I'm able to log into Trimble Connect, but when I try to bring the sample project in, it says, "3d model being prepared for viewing in hololens, please try again later." I'm not able to Launch or download the project. ...
    created by simba