Enable C2V button for HASP dongle key (hardware license)

Document created by Steven Witte on Feb 27, 2018
Version 1Show Document
  • View in full screen mode

This document help you to enable a useful option inside Sentinel Admin Control Center in order to generate a C2V file for a HASP dongle key.


1. Please make sure that you are using the latest Sentinel Admin version by visiting Sentinel web page here. There select Sentinel HASP/LDK - Command Line Run-time Installer inside Featured Downloads. Latest version is 7.63. Download the file and run it as Full Admin rights.

2. Open Sentinel Admin Control Center (http://localhost:1947/_int_/devices.html) on the machine where you want to generate a C2V file from a HASP dongle key.

3. If you do not see a C2V button, and having a HASP dongle key attached to the machine/PC, procceed as follows:

3.1. Go to Configuration / Basic Settings / and check Generate C2V file for HASP key

3.2. Click Submit to save the change

SACC Basic settings

3.3. Go back to Sentinel Keys. You should see a C2V button now for the HASP dongle key (hardware license).

SACC Sentinel Keys


This TechTip here is covering this procedure as well.

TechTip - TBC: Enable C2V button for HASP dongle key (hardware license)


Cheers Steven