Field Guide - Trimble SX10 In-Field Calibration Guide

Document created by Steven Witte on Feb 1, 2019
Version 1Show Document
  • View in full screen mode

Since Trimble Access version 2018.20, Trimble SX10 users are able to use the feature called Automatic camera collimation. This type of field calibration and the other ones are nicely document inside this Field Guide - Trimble SX10 In-Field Calibration Guide. On Trimble SX10 you have to use SX10 firmware version S2.1.9 to be able to use these new features inside Trimble Access version 2018.20.

 

Cheers Steven

Outcomes