FAQ: Generating a fixed IP address for IBSS

Document created by David Kosakowski on May 24, 2020Last modified by Grant Higgins on May 25, 2020
Version 2Show Document
  • View in full screen mode


Is it possible to configure a fixed IP Address for an IBSS in WM to share corrections with subcontractors or other customers on my projects?


The IP address of the NTRIPCaster which resides in WorksManager is not configurable. The advantage of using an IBSS is that it is not necessary. Registered devices (i.e., rovers) can connect to it without knowing the caster IP.

Partnering as is supported in TCC is not yet supported, so the device connecting to the IBSS must be in the same organization.