FAQ: Work Remaining volume calculations

Document created by David Kosakowski on Oct 22, 2020Last modified by David Kosakowski on Oct 22, 2020
Version 4Show Document
  • View in full screen mode

Question:

How does the ‘Work Remaining’ volumes calculation work?

 

Answer:

Work Remaining calculates the volume remaining ‘From’ a Machine Last Pass surface ‘To’ a Design surface. This calculation indicates how much volume remains in order to get to the Design grade based on an as-at state of the ground from machine data. When a Surveyed Surface is included, it will also calculate the volume between the surveyed surface and the design boundary. 

Note: There must be an overlap between the Machine Last Pass Surface and/or Surveyed Surfaces and the Design Surface in order for a volume to be calculated.

Attachments

    Outcomes