• National Geodetic Survey seeking input on GNSS Vector Exchange (GVX) file format

    Greetings Folks, sharing this link here in the hopes that some of the Trimble developers may see it and be interested in providing any feedback.  One potential with this file format is to allow users to upload RT...
    Jeff Jalbrzikowski
    last modified by Jeff Jalbrzikowski
  • Retain keep in / keep out point cloud selection

    When using the keep in / keep out point cloud selection, it would be good to retain the left over points in the view (if there are some) to continue with breaking down the selection afterwards.   So for example ...
    Ross McAtamney
    last modified by Ross McAtamney
  • Datum Adjustment for Point Clouds

    Possibly this already exists however I am not finding it. I think it would be very helpful to have a tool that would allow a vertical shit (either +/-) to a point cloud group, without having to re-run though the refer...
    James Nicolau
    created by James Nicolau
  • Why does feature linework not draw in point number order?

    When we combine multiple jobs files and send out a single job file with all the points the linework jumps. Example: point 31101 (edge of asphalt) 1549 ea      Inverse between 31101 &am...
    James Barnett
    last modified by James Barnett
  • Digitizing PDF Cross Sections, Wanted Feature

    When digitizing pdf cross sections, it would be nice if when in the digitizing window, a right click would also give an option to create a point based on station and offset rather than having to left click a point the...
    Scott Threet
    created by Scott Threet
  • Edit Linestring Vertical Command / Smart Reference Elevations

    enhancement request Alan Sharp   Enhancement request in the Vertical Tab, Location Type.  Has the development team considered adding under the location type drop down selection tool of adding an add elevat...
    Matt Voge
    last modified by Matt Voge
  • Extract 1 second position

    HI, just want to ask, is there any ways to get the x and y for every second of GPS observation. I already observed one station using trimble R10, use fast static and 8 minute observation and store the data every 1 sec...
    HULWAN AFIF
    last modified by HULWAN AFIF
  • Option to put extracted trees into own region

    It would be great to be able to identify and turn off individual trees in a point cloud, for cases such as removing them from underneath where a building design might be placed or identifying what effect trees would h...
    Ross McAtamney
    last modified by Ross McAtamney
  • Surface Sampling Distance

    Is there any way to adjust the sampling distance per individual surface other than the global settings for the project? Quite often I find the need to have my Finish Design surface densified more than an existing grou...
    todd horvath
    last modified by todd horvath
  • 3d Utility Network Loading into Trimble Access

    Hey guys, I think I'm going crazy.  I was sure that I had loaded a designer's 3d pipe network into Trimble Access as a 3d dxf, and was able to see all the pipe sizes and inverts, etc for use when assisting with ...
    Dean Teska
    created by Dean Teska
  • Calculated point in Access does not move after TBC merge

       When the field crews create a point by distance-distance intersect in the field with Trimble Access this point does not move in TBC depending on the type of adjustment performed.    N...
    James Barnett
    last modified by James Barnett
  • Side Slope transitions in a corridor model.

    In creating a corridor model using templates-the outside instruction include tie slopes, 2:1 to 3:1 cut or fill.  I am experiencing abrupt changes at my tie slopes at each template station rather than any sort of...
    Cliff Culhane
    last modified by Cliff Culhane
  • Catalyst and Samsung Note 7-9

    Could you please let me know if Samsung Note 7- 9 is compatible with Catalyst and Penmap   Thanks.
    Saif Bin Darwish
    last modified by Saif Bin Darwish
  • Precise GLONASS orbits - additional resource

    In Russia we have good official resource containing GLONASS and GPS+GLONASS precise orbit files (ultra, rapid and final) in SP3 format.   ftp://ftp.glonass-iac.ru/MCC/PRODUCTS/ Unfortunately TBC do not able to ...
    Michael Karavanov
    last modified by Michael Karavanov
  • Civil 3D surface to Finished design in TBC-HCE to apply site improvements?

    What is the best way to take a surface from Civil 3D and make it into the Finished Design surface in TBC-HCE so that I can apply site improvements to it?
    Kris Van Dyke
    last modified by Kris Van Dyke
  • Merging multipe job files in TBC

    I have several crews that are copying job files and renaming them. I want to bring all of these job files together, but when I do I am doubling, tripling, quadrupling, the vectors and point grid coordinates. What is t...
    James Barnett
    last modified by James Barnett
  • Problems in TBC building corridor

    For some reason TBC is not transitioning between my templates in my corridor. The corridor follows the current template and then makes 100% of the change at the exact location of the next template. Any ideas??
    James watts
    last modified by James watts
  • Moving Scan Data from One Project to Another

    I was wondering what is the best way to move SX-10 scan data between TBC projects?
    Harold Twomey
    last modified by Harold Twomey
  • Error Ellipses In TBC

    I am wondering if there are any plans to enhance the capabilities of how error ellipses get displayed in TBC, such as giving the user the ability to scale the size as we could do in TGO. Also adding back the abil...
    Jesse Kozlowski
    last modified by Jesse Kozlowski
  • TBC License Issue

      I was looking for some assistance with a license issue we keep running into.  At current we have 20 TBC licenses we pull from on our license server.  We recently had to pull one of these to add the &l...
    Ross Chaloupka
    last modified by Ross Chaloupka