• Volume and area between two surfaces

    Hello,   Could someone guide me in the right direction on how to calculate volume between two surfaces?  Also im looking for a way to get the cut area.   Thank you   Best regards
    witold urbas
    last modified by witold urbas
  • Access current project path/folder

    Hello,   I am having some problems finding the project folder/path. How can i access that information?   Thanks
    witold urbas
    last modified by witold urbas
  • TBC macros - documentation, printout etc

    Hello,   Im quite new to TBC macros and im not very used to working with MS visual Studio. Can i try my macros without launching TBC? It takes a while to restart tbc after every edit   Is there a documen...
    witold urbas
    last modified by witold urbas
  • share/sell macros

    Hello,   What is the intended workflow if i want to share(free) or sell macros?  I thought that TML status was created for this but i can not find a way of adding my own macros.   Thank you   Be...
    witold urbas
    last modified by witold urbas
  • "job report generator" tool

    Hello everyone,   I would like to create a macro that uses the "job report generator" tool from tbc. I have looked in the object browser but i had problems finding the what i should use. Is there someone that...
    witold urbas
    created by witold urbas
  • Creating custom reports with TBC macro

    Hello,   Im looking for a way to create a way of presenting and exporting custom (surface-surface volue)reports. Im thinking it might be possible to create something with TBC macros. But im having problems ...
    witold urbas
    last modified by witold urbas
  • Creating a macro that generates new layers based on active layers, and populate them with Z values for points in the same color as the original layer.

    I would like to create a macro that 1: foreach layer I have active creates an additional layer of the same name but with the suffix "txt". 2: Gives each new layer the same color as the layer it was based upon. 3: Popu...
    Christian Andersson
    last modified by Christian Andersson
  • Macro to select all DTM_Type_ground points and linestrings?

    Is it possible to crate a macro to select all points and linestrings in a project at once, instead of multiple selections with advanced select?
    Jason harmon
    last modified by Jason harmon
  • Feature Request: "Undo" mouse-over doesn't update

    When using the "undo" function on the quick access toolbar, you can hover to review the mouseover, which gives you an idea of what function you are going to undo. When undoing multiple functions back to back, the mous...
    Devin Rogers
    last modified by Devin Rogers
  • I need to create X-Sections which I can do, but the x-section is starting at 0.00 elev and I am at a 10.00 to 80.00 elevation which makes my 80 elevation sections 1 per page. how do i correct this?

    with the elevation at 10 I can fit 3 sections per page but at the other end of the project the elevation is 80.0 and the x-section view starts at 0 on every page. How is this corrected so I get a standard view everytime
    mark porter
    last modified by mark porter
  • Select all points with Media Folder

    This may not need to be a macro but may be the perfect scenario for one:  we are trying to export all points that have media folders attached, and include the media folder in the export to google earth.  The...
    Dean Teska
    last modified by Dean Teska
  • Parabola for Bridge Grades

    I had a guy ask me for an easier way to put Dead Load Deflections into his elevations for bridge beams. So theoretically you would select a line, calculate a spacing either by interval or dividing it by an equal numbe...
    Shea Huckaby
    last modified by Shea Huckaby
  • How the classification algorithm work behind the TBC version 5.0?

    Hello, I have question about Pole classification using TBC version 5.0 I have MLS data (refer into figure), I want to detect pole but the pole cannot be detected as well. Anyone know how the algorithm work behind the...
    Atika Marwati
    last modified by Atika Marwati
  • Calling TBC Command from custom Macro

    Hi,   I've just started with Macros SDK in Trimble Business Center and I'm struggling a bit to find any learning material. I was wondering if it's possible to call an existing command from my python macro?...
    Grzegorz Piotrowski
    last modified by Grzegorz Piotrowski
  • Revenant Going Indie (again!)

    Hello (again!) from Revenant Solutions!   It has been a long time since our first hello, and sadly, we've been fairly quiet on the forums.  Like the rest of the world, we have been trying to navigate t...
    Quan Mueller
    last modified by Quan Mueller
  • TML Developer - Revenant Solutions

    Revenant Solutions LLC is an independent software developer based in Westminster, Colorado.   After developing Business Center - Heavy Construction Edition for 12 years, Revenant Solutions was formed in 2018 to p...
    Quan Mueller
    last modified by Quan Mueller
  • Is there something like "iline" in Terramodel.

    I am looking to see if there is a command to create multiple points at the intersection of multiple lines in one selection. In Terramodel, there was a TML called "iline". This would allow me to pick several lines and ...
    Sean McCarthy
    last modified by Sean McCarthy
  • TML - OffsetSurface

    The OffsetSurface TML is included in the TBC 5.0 install but I have updated it to include support for adding a clipping boundary while it copies the surface. The clipping boundary is optional. If you download this zip...
    Gary Lantaff
    last modified by Gary Lantaff
  • TML - TMLStatus

    TMLStatus is a TML written by Rockpile Solutions to manage registered TMLs from within Trimble Business Center. It allows you to find registered TMLs and easily install and / or update them.  The link TMLSt...
    Peter Kistler
    last modified by Peter Kistler
  • TML - Create Point By Station Offset

    This macro is helpful in cases where you have lots of points to key in based on their station and offset values.  The station and elevation support the "Auto-Advance" option. If "Auto-Advance" set on the station ...
    Gary Lantaff
    created by Gary Lantaff