• Macro to select all DTM_Type_ground points and linestrings?

    Is it possible to crate a macro to select all points and linestrings in a project at once, instead of multiple selections with advanced select?
    Jason harmon
    last modified by Jason harmon
  • Convert to linestring, alignment VPIs off.

    Anyone else having this problem when converting an alignment?  The VPI's end up way off the linestring after converting.  We do a lot of curb alignment models for Topcon curb machines and having the ability ...
    Brian Jurgella
    created by Brian Jurgella
  • How could I turn discrete points into triangle mesh model?

    After importing the .pts into TBC,I wanna turn these discrete points into triangle mesh model.But I can't find relative commands in all command panel.Where can I find the command?And where can I find more systema...
    xiaotong xi
    last modified by xiaotong xi
  • Convert to Linestring - Weird Results

    I am getting weird results when I run the convert to linestring macro on on entities that used to be part of a block and have hatching. Please see the video for a better explanation.     I am not sure whe...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Convert to linesting - option to skip horizontal alignments

    Can we get an option in the convert to linestring TML to skip horizontal alignments? Maybe a check box.    I ran this command on a project this morning and had it erase my horizontal alignments without real...
    Patrick L'heureux
    last modified by Patrick L'heureux
  • updated macro versions for TBC 5.1

    Hi, I tried to add the macros to the appropriate blog entries. But I can't add an attachment to my comment. I'm also unable to upload them to the shareware folder.   But here, creating a new topic, I'm able to...
    Ronny Schneider
    last modified by Ronny Schneider
  • Will the Best Fit Linestring sample macro be posted or uploaded to TMLStatus?

    I installed this sample macro during PUG 2.0 (April 2019) and I'm not finding it on this forum or when I run TMLStatus.   In TMLStatus, my copy shows up as a "local" TML - i.e. it's not registered w/ Rockpile ye...
    Quan Mueller
    created by Quan Mueller
  • How do I add the TML's that are free to the Ribbion?

    I have done this before, but for the life of me, I can't remember how.  I can click on the "TML Status". All the TML's show up and say wheither there up to date or not, but from there I'm lost.  Thanks for...
    Danny Wrench
    last modified by Danny Wrench
  • TBC v5.1 appears frozen on startup due to bug in sample macro SurfaceToGrid

    (Since this involves sample macros I posted here instead of the main TBC forum - but I can post there also if that's a better place.)   After installing TBC v5.1, I tried starting TBC and it appeared to be froze...
    Quan Mueller
    last modified by Quan Mueller
  • Can Trimble add a "Sample Macros" category to this group/place?

    Right now, the blog post for each of the sample macros created by Trimble are mixed in with other general TML language questions in the "Macro languages" category.   It would nice if there was a separate categor...
    Quan Mueller
    created by Quan Mueller
  • Syntax error in "FindSurfaceArea.py" on TBC 5.10 Startup

    Since updating TBC to 5.10 I get the following error when starting the program:   I checked the Rockpile TML Status list and it said that the macro was not installed. I reinstalled the macro, but still ge...
    Marc DeMers
    last modified by Marc DeMers
  • Getting Unhandled Exception creating a WPF window

    a bit of a beginner - the WPF windows work well in everything except IronPython environment - any known issues - running IronPython 2.7 (32-bit) I can load the trimble controls  have tried 3 methods to create t...
    Ken Pile
    last modified by Ken Pile
  • Can we use C# to create commands

    in TBC 5.0 the new macro commands could be created by C# or only by IronPython ?   Regards
    mohammed nour
    last modified by mohammed nour
  • is anyone working on TML for the drill module?

    good day I am trying to get started on writing a macro for drilling module are there any TML's I can refer to
    Brice Kgetsane
    last modified by Brice Kgetsane
  • Can't add "tbcMacros" to MSVS17 Project setup

    I'm trying to setup Microsoft Visual Studio 2017 Community with the TBC Python project and as per '02 Setting up IDE' guide. I've installed/uninstalled the Trimble Macros SDK.msi  multiple times but still do...
    Ray Volker
    last modified by Ray Volker
  • Error with Offset Surface

    I received the error below when trying to offset the surface in the attached vcl.  
    Patrick L'heureux
    last modified by Patrick L'heureux
  • Problems Configuring Visual Studio

    First, I am totally new to Python and TBC Macros. I have stepped through the installation process very carefully and I hit a wall at the following locations. By wall I mean I don't get the behavior noted in the instru...
    Marshall Cant
    last modified by Marshall Cant
  • A Macro to add a prefix/suffix to a multiple surfaces at once

    I would like to put in a request for a macro to for the ability add a prefix/suffix to multiple surfaces at once.This would make organizing data from an engineer a lot quicker.   What I envision: A se...
  • Where do I start?

    I have a been using TBC since V1.0 and have a lot of ideas for functions/workflows I would like to add. But.... Where do I start? I have a little C# (Basic Classes, Functions, Parameters etc) knowledge from Unity Ga...
    Ray Volker
    last modified by Ray Volker
  • Copy linework and relayer with prefix

    I would like to put in a request for a macro to copy linework with an option to create new layers by adding a prefix to the lineworks' current layer and the option to set a layer group. All of the other layer pro...
    Patrick L'heureux
    last modified by Patrick L'heureux