Position properties date is wrong and files can not be post processed. Attached jpg
Hi Don, Welcome to the forum!
This is a GPS week number rollover issue. What version of Pathfinder Office are you running?
sorry that was terra.
we run 4.0 on old recon handhelds
I'm not sure about the recon handhelds, if you fill out the linked form, someone from Trimble will get back to you with more information.
Any chance I could simply replace the receivers with a rollover compliant model? And if so do you have a few in mind that may work?
Honestly, I am not sure. Field controllers are not my area of expertise, if someone else knows please chime in!
In the mean time, your local dealer would be an excellent resource for your options. You can find their contact info if you don't have it already here: http://dealerlocator.trimble.com/locator.aspx
Matt's correct, you should contact your Trimble reseller to discuss your options.
Looking at the date in the screen grab error and you commenting that you have a Trimble Recon, I suspect you are using a Pro series receiver on non-compliant GPS firmware.
depending on the Pro-series receiver this should be upgradable - you can check out the firmware version required here
Here's a few WNRO resources so you have all the information you need:
With regards to Terrasync and GPS Pathfinder Office you need to be running a minimum of v5.21 Terrasync and GPS Pathfinder Office v5.20 for SW compliance.
Your reseller will be able to help you through this and provide the firmware if upgradable, so please contact them as soon as possible
Retrieving data ...