Does anybody know how to run the earthworks simulator using windows 10?
The Earthworks 1.10 sim works great on Windows 10. The install package includes Bluestacks Android emulator, so they all run on one screen. You can use an Android display, but it's not required.
My first install attempt failed because you need to run the .exe.zip file 'as administrator.'
As of right now you will need an android tablet. I will email you the setup.
Thanks Pat. I'll take a look at it.
Patrick, I have been running the earthworks emulator on 10 different PC since last November by using blue stacks. Just tricked the pc into thinking is was talking to another computer by running a short Ethernet cable out one port and back in another port. It worked great for training last winter.
I tried to do that yesterday. I have the bluestacks installed but I don't know what to do after that?
I can't find a step by step instruction from Trimble or SITECH.
You have to do some stuff with the IP settings on your PC. I'll just got a new laptop and need to re-install the emulator and I'll write up some instructions.
Hi Eric, you will find the instructions that you need in the User Guide, Chapter 2 - Setting up the Trimble Earthworkssimulator platform. This user guide is a pdf document which can be found in the same folder as the EWSim.exe file that is used to launch the simulator.
The User Guide also contains other information that you may find useful.
Thank you Mark
Mark do you have a link to this guide? The guide i have from Sitech is not showing Chapter 2 - Setting up the Trimble Earthworks simulator platform.
Hi Roan Blake from v1.10 you can access the User Guide via the F1.Help button, as well as finding it in the folder that you extracted all the files to upon initial launching of the application file.
For versions earlier than v1.10 it can be found in the folder that you extracted all the files to upon initial launching of the application file.
Right-click to run the Simulator_Earthworks_1_10_0.exe.zip 'as administrator.'
Once installed, run the C:\Simulator_Earthworks_1_10_0.exe\EWSim.exe
Then you can run the operator app from the shortcut on your desktop, which should automatically launch in Bluestacks.
Thank you Nelson
Where can I download this from?
I'm getting it from my Sitechdealer
On Sun, Sep 22, 2019, 11:44 AM email@example.com <firstname.lastname@example.org>
Thank you Erik.
Would anyone mind putting the install file up on Dropbox, etc to download?
I got to this point and that's it. I'm doing something wrong here.
You need to run EWSim first. Look on your C: drive in the folder with the same name as the install file.
Just so that I can understand the issue that you are having, can you please confirm if you have run through the exact step sequence that is documented in the User Guide, section 2.10.1 Optional—BlueStacks Android emulator.
I am assuming you are using v1.10 when I say section 1.10.1. Older versions of the guide may apply a different number to this section.
I thought i did twice. SITECH also told me that they can't make it work but I don't think they tried hard enough because they have the TD520. It's okay though, I'll ask our company if I can replace my ipad issued to me with android tablet. Thanks for all the help though.
Let me know if you keep having problems and I will be happy to help you look for a solution.
Many people are using the simulator without any problems and it is thoroughly tested by my team prior to each release, so we know that it works for most people.
Mark, do you still use a eithernet jumper to make the connection or is it done in the computer.
I made it work with the jumper and BlueStacks last November for training.
Hi Ken Bork, the connection is done in the pc by editing a particular file. The details of how to do this have been included in the User Guide that is bundled with the simulator since we verified it working with Bluestacks in the v1.9 release.
I have had this 1.7 version running on windows 10 for about a year and it worked great for training.
Thank you. SITECH came and help me out and it's working now.
I got it all mixed up. Found out that inside the folder has 1.7 and 1.10 version and mixing all things up.
Can I add my own design so I can play around with our actual job design?
I`am very intrested in this simulator.
Is there anybody who can supply me the installation file?
I'm hoping for the same thing.
Corbitt Shoffner, Cees-Jan Klos the Earthworks Training Simulator is published here on Partners with each release of Earthworks. You can find the most recent version on the v1.10 release package page - Trimble Earthworks and Cat GRADE for Dozers, Excavators and Motor Graders Version 1.10.X Release Package
Thanks for posting! Unfortunately for me the site is stating "unauthorized" when I click on your link.
Thanks for posting! Unfortunately for me the site is stating "unauthorized" when I click on your link. ??
Anyone know where i can get i, mybe from an dropbox or so ??
I get the same message as Flemming Pedersen :-(
8.1 works great no blue stacks needed
have it working with Samsung tab A wireless though hotspot on computer
Yes u can add you files it worked for me in the Dupo folder there is another folder with the job files in it I copied to.
You can add projects to you emulator by going to your C:Simulator/Files/ Earthworks/Projects and paste in your project from your earthworks library.
Ok thank you
Sent from my iPhone
I am getting the following screen
Any thoughts or ideas are much appreciated!
I had the same problem so I downloaded 1.8 for windows --- did not use bluestacks
Bought a Samsung Tab A and got it to work wireless through my hotspot .
Sent from Mail for Windows 10
Has anyone got this message with Blue Stack. I'm pretty sure I got the rest of the steps down. I was thinking its something to do with the setting of Blue Stack? Maybe performance related?
Could also be that my PC is a POS.
K, I had to change the display setting to a 16x10 ratio ( I choose 1600 x 1000) that seem to get me through it.
Now, I'm having an issue with the Operator App. I am able to get in and select me site and design but the app crashes when i try to "Start". It will work in 2D just fine, but cant get it to stay open with 3D. Any thoughts?
Refer to my last comment about my PC.
Hi Josh, are you having this issue with a 3D design of your own that you are loading, or does it occur with the 3D designs that are bundled with the simulator?
I've tried both custom designs and the ones bundled. I've also tried using both v 1.8 and v 1.10. I am able to trick it on 1.8 by starting the Job in 2D and then switch over to 3D design after its running. However it crashes after little use. Which leads me to think my PC just doesn't have the horsepower to keep up.
With v. 1.10 I get a GNSS error. I've gotten it before with 1.10 running on a Samsung Tablet too. It doesn't allow me to even start a design project, custom or bundled.
The F12.Graphics button in the simulator window puts the simulator into a reduced or no graphics mode. This can help reduce the processing load for those with lower spec PC's.
Definitely on the right track there. Dropping the Graphics help me out a bit and then changing the frame rate within Blue Stack help out even more (Im set at about 20). I can pretty much do everything now in v1.8. I can use it to look at custom designs and walk through Infield design. Which is a big help on the support side. I have noticed that when I crash the program in a user profile I have to go into the Web UI side and delete that profile and create a new one.
I have not got 1.10 to work. It still give me the GNSS error.
I think 1.10 is easier, just change your Ethernet settings on laptop & TD520 and it takes off. The graphics has to be changed on my laptop as well. I also received a YAMS error and have to do go into command prompt and run a command and then I'm good. I have not used or needed the blue stacks thing.
I completely agree. The TD520 is the best way to go. I wouldn't Demo the product on any other devise. The Blue Stacks is a nice option for support issues. I'm on the road alot so if a customer calls and wants me to walk him through something its much easier to have everything run on the computer verse connecting up an external display.
What command prompt do you have to run in v1.10?
It is a Proxy error within our firewall that requires Port 80. It blocks the application from communicating. I just turn them off in dos with a command and it fixes my issue.
Soon there have been many who have asked how to get that app to run.Incl myself.Doesn't anyone bother to make a todo guide on how to install and get it running, I've even tried on Windows-PC, Samsung S10e, Panasonic Touchpad FZ-A2 with no luck. If you are "lucky" it starts up and shows something with EC520 error ....Have tried version 1.4 / 1.8 & 1.10 all for Android.Has also been through darkcity on Windows with no luck.There should have been an opportunity to get that Simulator running so I can test projects before they are put out to the excavators ...
Thanks and Best Regards
If you want to use an Android Emulator here is how we do it.
Some of our sales reps run it like that and all of us Supporters. One of them is experiencing some graphic glitches but that most likely comes from the icon arranging program he runs on the windows desktop. But not many crashes so far, runs reasonably stable.
But be aware that you need a rather good computer / CPU with virtualization to run the machine and Android Emulator.
My old private Surface Pro 3 with i5 and 8 GB wasn't able to run it.
Our work Thinkpad laptops look like that.
1. Install a Fake Ethernet Adapter (MS Loopback Adapter) according to this video
the driver comes with Windows, no need to download
2. change the IP Address of that Ethernet Adapter to 192.168.168.1
3. Install the machine side of the Earthworks Simulator, unzip the file to i.e. c:\EW-Sim110
4. Start the machine simulation, the excavator needs to be on the screen, now a few windows of the firewall should pop up, allow at least the public setting
- if the windows don't pop up check in the firewall settings that the following programs have at least a tick for "public"
5. if you start the machine simulator it shouldn't show a pink yams error in the top left corner
- if it still does you probably need to call "services.msc" and change the settings for the "WWW-Publishing Service" on the advanced tab to "stop" and "start manual"
6. if the machine side runs without pink error messages you should also be able to call the web interface from your web browser 192.168.168.1
Now to the Android side
7. we use the Nox Android Emulator from www.bignox.com
8. download and install it
9. interrupt the first start since Earthworks won't run with the standard Android 4 anyway
10. on the Windows desktop you should also find a "Multi-Drive" Icon
11. start that one and add an Android 7 Environment
12. start the environment once and change the settings of the environment as follows
a user defined ratio of 16/10 is important and resolution above 1000 or so, refer to the EW PDF for minimum requirements for BYO device
changing the model to "SM-T585" which is a "Galaxy Tab 10" was important, with the standard setting as mobile phone the Android Emulator did crash upon loading Earthworks
13. close and restart the Android, no need to change any Network settings in Android
14. now you should be able to start the browser in Android and call 192.168.168.1
15. enter the web interface using the credentials admin / EarthWorks#1
16. unlock the lock icon
17. go to "Advanced - > Install Operator App -> Install Direct"
18. once the installation is done you should be able to run EarthWorks from the Android Main Screen
If you use your own models in "C:\EW-Sim110\bin\earthworks\_duplo\projects" then don't use any funny characters in the project name. The Earthworks on the machine will probably handle them but the Android emulator has its problems with ä, ö, ü and the like.
Have fun digging
Hi Ronny, thanks for the guide.
I will take a look at it in the near future.
The User Guide can be downloaded from Partners along with the simulator software. The most recent version is available here - Trimble Earthworks and Cat GRADE for Dozers, Excavators and Motor Graders Version 1.10.X Release Package
In case you download only the simulator software bundle from Partners you can still find the User Guide bundled in with the simulator files that you downloaded. See my earlier post that shows you where to find the User Guide.
If you follow all of the recommendations in the User Guide you should be able to get the simulator running on your PC.
A support case can be raised if you can't get it working after following the recommendations in the User Guide.
Thank, but unfortunately, I do not have permission to download this...
I don't know who get's access to what areas of Partners but I am keen to see the simulator be used to the best benefits of Trimble.
Have you applied for and been refused access to this area of Partners.
I used a T10 with BlueStacks and the Earthworks 1.10 Sim runs great without all the company IT network restrictions and a touch screen. Our trainer can setup a training class in 5 mins and project the display on a tv in conference room.
Is the Earthworks Sim Accesseble and free for Earthworks Customers?
It is free for anyone to use.
Where can I download it from?
If the link don't work just search the title below and it will be at the bottom of the page.
As I am now just a customer it seems that I dont have access to it.
Will the emulator allow you to run through and check over your model for any problem and or discrepancy's ?? What are some other benefits of the emulator ??
Retrieving data ...