Problem with UAV GROUND CONTROL on android 10, after focusing the point GPS breaks down and it is necessary to wait again.
The behaviour you are seeing (and show in the videos) is normal
If you wish to maintain the fix throughout for more rapid capture then you must do the following
The OS update was not the cause here but rather the workflow chosen.
Some additional follow up on this for you Petr
The has been an update to the UAV Ground Control app with v1.0.025 (June 3 release)
The release highlights include
I'd also recommend you update your version of Trimble Mobile Manager to the latest and concurrent release v22.214.171.1241 (June 3 release) - this release includes
For more information on how to configure orthometric height including the side loading of customer geoid models take a look at the post here: How to 'side-load' custom Geoid's for use in Trimble Mobile Manager
We also have the UAV Ground Control Online help material here
I made all the deadlines you described a long time ago, so I sent you videos from the measurements that show the difference between Android 10 and 9 update did not help.
Odesláno mobilního telefonu .
do you have an ambassador in the Czech Republic to whom I would explain the problem with UAVGC on Android 10? Of course, we have the application set up correctly, we have performed the update. Have you seen the videos ???.
I'll send you a direct request for the log files through the support case I set up and we can go through this again.
We can go through this directly and I will post the conclusion here for all to view
Your local Trimble Reseller can be found using the URL: Where to Buy | Trimble Geospatial
Is it possible you can respond to my requests for log files please?
I created a case last week and have requested the files directly via email
If you have not received this then firstly check your Junk folder (the request was sent June 10th last week)
You can message me directly with your preferred email address in case I have used one you do not monitor
With the logs we can check the behaviour you are experiencing directly on your device
will send the logs unfortunately i won't get to that until next week. But I will definitely do it.
Thank `s Peter
Retrieving data ...