Good morning , I enter into the handheld a list of codes so that the field can then assign a code to a punto..can help?
User manual in Italian ?best regards
The Geo7X is a standalone piece of hardware. Essentially it's a computer and a GNSS receiver - all in one. The Geo7X requires the use of a software application to create the work flow you are looking for. Is there a specific software application you are running on your Geo7X? The most common are Trimble Access, Trimble TerraSync, and Trimble TerraFlex.
All three of these software solutions allow a field user to collect a Geographic point (punto) and additional information about the point (through the use of Drop down menus, comments, photos...etc.).
Do you have any additional information about the current software application you are using with your Geo7X or additional information about your work-flow so that we may point you in the correct direction?
The software is the TerraSync and the Pathfinder Office
per poterti rispondere ho bisogno di sapere che software di acquisizione dati usi.
Con il software Terrasync è sicuramente possibile associare a punti, linee ed aree attributi.
Se mi contatti a email@example.com ti posso inviare il manuale del Terrasync in italiano.
Paolo Di Giusto
Retrieving data ...