I am trying to do a drafting sheet for a simple site. I just want to have one plan view.
No matter what template I try to use when I make a new sheet view everything is blank.
can anyone help?
Are you sure you have the correct layers on? I believe that the default layers for the standard templates begin with "!".
Also check the "View:" dropdown at the bottom of the Sheet View. You need to select the correct Plan Set to view.
Do you have a Dynaview set up in the plan view? Then you need to go to the project explorer, right mouse click on the plan sheet go to properties and set up the Dynaview and view filter. Once that is done, right mouse click and select build sheets. Then right click on the sheet 1 and go to view sheets. Also make sure that the view filter in the plan sheet screen is set to All.
Let me know if you have any other issues.
Did you get this working - if not here are some simple steps
There are a number of videos on this subject as well as example Drafting Templates in the Blog Posts on Drafting on this forum previously.
Here is a link to one of the Blog Posts as a reference
Hope this helps - if not - send me the Project and I can take a look tomorrow
Retrieving data ...