Has anyone had an issue in that while trying to perform a scan using the sx10, a warning pops up regarding insufficient memory. The TCS7 has plenty of available GB when looking at its C: drive properties, so how can I resolve this issue?
What version of Trimble Access are you using? TA 2018 versions were 32 bit and could encounter insufficient memory issues. TA 2019 onwards is 64 bit and should resolve a lot of the memory issues.
Thanks for the info.
Scott Sherbut, RLS, PLS
Project Land Surveyor
1500 Eastport Plaza Drive, Suite 200
Collinsville, IL 62234
Office: (618) 345-8918, ext. 3612
Visit Our website at www.volkert.com<http://www.volkert.com/> and see what’s new at Volkert!
The information contained in this e-mail, including any accompanying documents or attachments, is from Volkert, is intended only for the use of the individual or entity named above, and is privileged and confidential. If you are not the intended recipient, be aware that any disclosure, dissemination, distribution, copying or use of the contents of this message is strictly prohibited. If you have received this message in error, please notify Volkert immediately at our corporate office (251) 342-1070. Thank you for your cooperation.
It could have been referring to storage space. I was about to start a SX10 scan but was told too little space free even though there was 24 GB free on the TSC7 main storage. I have a 256 GB SD card installed where I move projects to after they are done to keep the SSD uncluttered. After I moved a project it allowed me to do the scan. Consider doing something similar. A card that size was only $55.
Thanks for the advise.
Retrieving data ...