Hi Joel, There should be no relationship between Mock Location and receiver connectivity in TMM, and all our use/testing here confirms this. If you're not pairing to the R1 from inside TMM it might be ...
Hi Mark, It appears that to make an initial connection between TMM and a Trimble R1 for the first time, Mock Location must be set to TMM. My tests reveal no connection is possible until MOCK is set. ...
i did what florentin said and updated the gps config, there is actually a 25 version now that made it so that i did not have to go in and change that date. (i tried at first and had a hard time because ...
Ok thank you, I didn't know about two different operating systems in the background as I'm not that tech savvy lol, but my concern is the same as the original post my rapid point had like a 3-4 second ...
Based on the screenshot you have an invalid leap seconds error, and unknown antenna type. Please follow below steps to correct this issue, in TBC/Support/ Check for updates / Download and install Trimble ...