Trimble Business Center

This carnage is the result of a double tap on a two point gate feature.  Something most of us will be familiar with.  Scrolling through the point spreadsheet I am looking for the culprit.  I need TBC to auto zoom to the selected point in the list or at least highlight it in plan view.  Or maybe a right click and "find point" option.

Seems logical.

I had to find it via scrolling through the points on the TSC3, somewhat inefficient.
 


------------------------------
Wayne Bainbridge
------------------------------

What about "Select duplicate points", that should narrow it down a bit.

------------------------------
Ronny Schneider
------------------------------

Original Message:
Sent: 11-21-2022 10:32
From: Wayne Bainbridge
Subject: Auto zoom to point or right click and find point FEATURE REQUEST

This carnage is the result of a double tap on a two point gate feature.  Something most of us will be familiar with.  Scrolling through the point spreadsheet I am looking for the culprit.  I need TBC to auto zoom to the selected point in the list or at least highlight it in plan view.  Or maybe a right click and "find point" option.

Seems logical.

I had to find it via scrolling through the points on the TSC3, somewhat inefficient.
 


------------------------------
Wayne Bainbridge
------------------------------

You can also select any point in the Point List, right click and select Centre. If you're zoomed in further, it makes it easier to find the offending point in Plan View as the view is centred on that point.

------------------------------
Dwayne Rosie
------------------------------

Original Message:
Sent: 11-21-2022 10:32
From: Wayne Bainbridge
Subject: Auto zoom to point or right click and find point FEATURE REQUEST

This carnage is the result of a double tap on a two point gate feature.  Something most of us will be familiar with.  Scrolling through the point spreadsheet I am looking for the culprit.  I need TBC to auto zoom to the selected point in the list or at least highlight it in plan view.  Or maybe a right click and "find point" option.

Seems logical.

I had to find it via scrolling through the points on the TSC3, somewhat inefficient.
 


------------------------------
Wayne Bainbridge
------------------------------

I'm not familiar with the problem you are trying to initially describe.  Double tap on what?

------------------------------
Robert Hoy
------------------------------

Original Message:
Sent: 11-21-2022 10:32
From: Wayne Bainbridge
Subject: Auto zoom to point or right click and find point FEATURE REQUEST

This carnage is the result of a double tap on a two point gate feature.  Something most of us will be familiar with.  Scrolling through the point spreadsheet I am looking for the culprit.  I need TBC to auto zoom to the selected point in the list or at least highlight it in plan view.  Or maybe a right click and "find point" option.

Seems logical.

I had to find it via scrolling through the points on the TSC3, somewhat inefficient.
 


------------------------------
Wayne Bainbridge
------------------------------