Following this thread to see how this correct. I did do a sampling distance override in the corridor template setting and had several flags get removed. I exported the surface and reimported the surface. Looked fine.
roundabouts, never had issue as I closed short from the star of the alignment. I also use 3D lines to create my corridors by means of the SIDE SLOPE tools.
------------------------------
Francisco Guerrero
------------------------------
Original Message:
Sent: 03-23-2023 12:53
From: Adam Bower
Subject: Closed Loop Corridors
Thanks for the tip, let me try to shorten the last segment
------------------------------
Adam Bower
Original Message:
Sent: 03-23-2023 07:46
From: Gary Lantaff
Subject: Closed Loop Corridors
The easiest fix is to just shorten the last segment in the alignment by 0.01 ft. (so it's not a closed alignment)
Plan B would be to put a null template near the end of the alignment.
------------------------------
Gary Lantaff
Original Message:
Sent: 03-22-2023 16:03
From: Adam Bower
Subject: Closed Loop Corridors
Are these things always a disaster built as a corridor? I always feel there are issues when I do this. Not sure what's wrong with this corridor but we've got a million flags.
The attached VCL should import everything
------------------------------
Adam Bower
------------------------------