Trimble Business Center

Same problem here, using version 5.81. Any solution to this bug yet?

------------------------------
Mark Lagerweij
------------------------------

Original Message:
Sent: 12-09-2022 11:20
From: Andrew Haukås
Subject: Curb and Gutter Extraction Crash in 5.70

Albert,

   This issue has not been resolved in 5.80. Sorry I didn't get back to you sooner (tons of work isn't a bad thing). I'm attaching three files with the error messages, but the job files with scan data are too large to send. The sequence is thus:

1. Set up Curb and Gutter line extraction (this only happens with the curb routine as far as I know).
2. Run extraction and everything seems fine. Curbs line up nice etc.
3. Finish extraction.
4. Check QA/QC and create lines.
5. Immediate error
6. Function closes
7. Program freezes up and will not close without Task Manager.

If you have a way to upload large files I can send you a couple of archived projects this has happened on, but it happens on ALL projects. LAS imports, SX10 data, SFM, doesn't seem to matter the source.

Nope. Still the same problem. The curb and gutter extraction is nonfunctional on my computer (actually, this is now a second computer, the company upgraded). It's been attempted on Windows 11 and Windows 10 and v5.70, v5.80, and v5.81, all with the same failing result, full program crash.

------------------------------
Andrew Haukås
------------------------------

Original Message:
Sent: 01-26-2023 11:42
From: Mark Lagerweij
Subject: Curb and Gutter Extraction Crash in 5.70

Same problem here, using version 5.81. Any solution to this bug yet?

------------------------------
Mark Lagerweij

Original Message:
Sent: 12-09-2022 11:20
From: Andrew Haukås
Subject: Curb and Gutter Extraction Crash in 5.70

Albert,

   This issue has not been resolved in 5.80. Sorry I didn't get back to you sooner (tons of work isn't a bad thing). I'm attaching three files with the error messages, but the job files with scan data are too large to send. The sequence is thus:

1. Set up Curb and Gutter line extraction (this only happens with the curb routine as far as I know).
2. Run extraction and everything seems fine. Curbs line up nice etc.
3. Finish extraction.
4. Check QA/QC and create lines.
5. Immediate error
6. Function closes
7. Program freezes up and will not close without Task Manager.

If you have a way to upload large files I can send you a couple of archived projects this has happened on, but it happens on ALL projects. LAS imports, SX10 data, SFM, doesn't seem to matter the source.

Hi Andrew,

From the screenshot I see that the command is undocked. This is a known issue on which we are working at the moment. For now, please do not undock the command window while using Line feature extraction.

Regards,
Evelina

------------------------------
Evelina Indilaite-Gale
------------------------------

Original Message:
Sent: 12-09-2022 11:20
From: Andrew Haukås
Subject: Curb and Gutter Extraction Crash in 5.70

Albert,

   This issue has not been resolved in 5.80. Sorry I didn't get back to you sooner (tons of work isn't a bad thing). I'm attaching three files with the error messages, but the job files with scan data are too large to send. The sequence is thus:

1. Set up Curb and Gutter line extraction (this only happens with the curb routine as far as I know).
2. Run extraction and everything seems fine. Curbs line up nice etc.
3. Finish extraction.
4. Check QA/QC and create lines.
5. Immediate error
6. Function closes
7. Program freezes up and will not close without Task Manager.

If you have a way to upload large files I can send you a couple of archived projects this has happened on, but it happens on ALL projects. LAS imports, SX10 data, SFM, doesn't seem to matter the source.

I've been having the same issue with TBC 5.81 did Trimble  resolve this is for you?

------------------------------
DANIEL ARIAS
------------------------------

Original Message:
Sent: 12-09-2022 11:20
From: Andrew Haukås
Subject: Curb and Gutter Extraction Crash in 5.70

Albert,

   This issue has not been resolved in 5.80. Sorry I didn't get back to you sooner (tons of work isn't a bad thing). I'm attaching three files with the error messages, but the job files with scan data are too large to send. The sequence is thus:

1. Set up Curb and Gutter line extraction (this only happens with the curb routine as far as I know).
2. Run extraction and everything seems fine. Curbs line up nice etc.
3. Finish extraction.
4. Check QA/QC and create lines.
5. Immediate error
6. Function closes
7. Program freezes up and will not close without Task Manager.

If you have a way to upload large files I can send you a couple of archived projects this has happened on, but it happens on ALL projects. LAS imports, SX10 data, SFM, doesn't seem to matter the source.