Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

Drawing alignment

  • 1.  Drawing alignment

    Posted 08-04-2022 18:27
    In CAD There's a command called align which is used for scaling or positioning drawing in 3D  using reference points.What is the equivalent in TBC that performs the same  function?I tried the scale function in TBC but it's slighly different.

    ------------------------------
    Julius Joseph
    ------------------------------


  • 2.  RE: Drawing alignment

    Posted 08-05-2022 00:16
    Not sure what the CAD command exactly does.
    In TBC you can try "By Point". That uses 2 points to compute the translation/rotation/scale

    For full 3D rotation around all 3 axis you can try "Transform Survey Points" with 7 parameters, although I would be careful and double check when used on alignments, arc, splines.



    ------------------------------
    Ronny Schneider
    ------------------------------

    Original Message


  • 3.  RE: Drawing alignment

    Posted 08-05-2022 04:58
    Thanks a lot, will give it a try.

    ------------------------------
    Julius Joseph
    ------------------------------

    Original Message


  • 4.  RE: Drawing alignment

    Posted 08-05-2022 08:07
    Import the drawing in to TBC, under Project explorer right click and either place image if it doesn't need to be on any specific coordinates or click georeference vector pdf where you can select different points and coordinates.

    ------------------------------
    steven carroll
    ------------------------------

    Original Message