Mapping and GIS Solutions Community

Hello Trimble,

With latest TMM version 4.0.0.1923 testing on Samsung Android Tab3 tablets (and Samsung Galaxy S+22 phones), there are 3 ESRI mobile apps (QuickCapture, Survey 123 and Field Maps).  Can you inform us which one, or possibly all 3 are we to disable or enable MOCK location before initiating TMM?  Another question then would be is closing TMM prior to launching any of the 3 apps a requirement or not.

Testing on control, and not getting the true accuracy results as displayed in either TMM or GPS "Accuracy" in the apps. So, chasing the core question - to Mock or NOT to Mock and using the "internal" receiver in each of these apps would be great to have your TMM folks tell us what is best practice.   

Appreciate your time in this matter.   

Hi Joel,

Both Survey123 and QuickCapture use Mock Location on Android, so you should select TMM as the Mock Location provider in your Android developer options. You should also ensure that TMM is running and connected to the receiver of course.

Field Maps integrates to the receiver directly, and uses TMM for setting of GNSS options like corrections and coordinate systems. You can leave TMM running at all times, not connected to the receiver, when using Field Maps.

Field Maps reads the TMM GNSS configuration when it sets up the connection to the receiver, so if you want to change these settings you can change to Internal GNSS in Field Maps, flip to TMM and change your GNSS settings, then go back to Field Maps and select your Trimble receiver again. 

I hope that's clear, feel free to reach out to me directly.

Best Regards,

Hello Trimble,

With latest TMM version 4.0.0.1923 testing on Samsung Android Tab3 tablets (and Samsung Galaxy S+22 phones), there are 3 ESRI mobile apps (QuickCapture, Survey 123 and Field Maps).  Can you inform us which one, or possibly all 3 are we to disable or enable MOCK location before initiating TMM?  Another question then would be is closing TMM prior to launching any of the 3 apps a requirement or not.

Testing on control, and not getting the true accuracy results as displayed in either TMM or GPS "Accuracy" in the apps. So, chasing the core question - to Mock or NOT to Mock and using the "internal" receiver in each of these apps would be great to have your TMM folks tell us what is best practice.   

Appreciate your time in this matter.   

Hi Joel,

Both Survey123 and QuickCapture use Mock Location on Android, so you should select TMM as the Mock Location provider in your Android developer options. You should also ensure that TMM is running and connected to the receiver of course.

Field Maps integrates to the receiver directly, and uses TMM for setting of GNSS options like corrections and coordinate systems. You can leave TMM running at all times, not connected to the receiver, when using Field Maps.

Field Maps reads the TMM GNSS configuration when it sets up the connection to the receiver, so if you want to change these settings you can change to Internal GNSS in Field Maps, flip to TMM and change your GNSS settings, then go back to Field Maps and select your Trimble receiver again. 

I hope that's clear, feel free to reach out to me directly.

Best Regards,

Hello Trimble,

With latest TMM version 4.0.0.1923 testing on Samsung Android Tab3 tablets (and Samsung Galaxy S+22 phones), there are 3 ESRI mobile apps (QuickCapture, Survey 123 and Field Maps).  Can you inform us which one, or possibly all 3 are we to disable or enable MOCK location before initiating TMM?  Another question then would be is closing TMM prior to launching any of the 3 apps a requirement or not.

Testing on control, and not getting the true accuracy results as displayed in either TMM or GPS "Accuracy" in the apps. So, chasing the core question - to Mock or NOT to Mock and using the "internal" receiver in each of these apps would be great to have your TMM folks tell us what is best practice.   

Appreciate your time in this matter.   

Thanks Joel! We're regularly talking to the folks at Esri and I'll be sure to pass your feedback along.

Best regards,

Mark.

Hi Joel,

Both Survey123 and QuickCapture use Mock Location on Android, so you should select TMM as the Mock Location provider in your Android developer options. You should also ensure that TMM is running and connected to the receiver of course.

Field Maps integrates to the receiver directly, and uses TMM for setting of GNSS options like corrections and coordinate systems. You can leave TMM running at all times, not connected to the receiver, when using Field Maps.

Field Maps reads the TMM GNSS configuration when it sets up the connection to the receiver, so if you want to change these settings you can change to Internal GNSS in Field Maps, flip to TMM and change your GNSS settings, then go back to Field Maps and select your Trimble receiver again. 

I hope that's clear, feel free to reach out to me directly.

Best Regards,

Hello Trimble,

With latest TMM version 4.0.0.1923 testing on Samsung Android Tab3 tablets (and Samsung Galaxy S+22 phones), there are 3 ESRI mobile apps (QuickCapture, Survey 123 and Field Maps).  Can you inform us which one, or possibly all 3 are we to disable or enable MOCK location before initiating TMM?  Another question then would be is closing TMM prior to launching any of the 3 apps a requirement or not.

Testing on control, and not getting the true accuracy results as displayed in either TMM or GPS "Accuracy" in the apps. So, chasing the core question - to Mock or NOT to Mock and using the "internal" receiver in each of these apps would be great to have your TMM folks tell us what is best practice.   

Appreciate your time in this matter.   

Hi Mark,

See this post.  Datum shift in ESRI QuickCapture | Mapping and GIS Solutions Community (trimble.com)

It would be great to talk to the team handling QuickCapture and Survey123.  I've posted some test results to the Ideas forum for Quick Capture.

Thanks Joel! We're regularly talking to the folks at Esri and I'll be sure to pass your feedback along.

Best regards,

Mark.

Hi Joel,

Both Survey123 and QuickCapture use Mock Location on Android, so you should select TMM as the Mock Location provider in your Android developer options. You should also ensure that TMM is running and connected to the receiver of course.

Field Maps integrates to the receiver directly, and uses TMM for setting of GNSS options like corrections and coordinate systems. You can leave TMM running at all times, not connected to the receiver, when using Field Maps.

Field Maps reads the TMM GNSS configuration when it sets up the connection to the receiver, so if you want to change these settings you can change to Internal GNSS in Field Maps, flip to TMM and change your GNSS settings, then go back to Field Maps and select your Trimble receiver again. 

I hope that's clear, feel free to reach out to me directly.

Best Regards,

Hello Trimble,

With latest TMM version 4.0.0.1923 testing on Samsung Android Tab3 tablets (and Samsung Galaxy S+22 phones), there are 3 ESRI mobile apps (QuickCapture, Survey 123 and Field Maps).  Can you inform us which one, or possibly all 3 are we to disable or enable MOCK location before initiating TMM?  Another question then would be is closing TMM prior to launching any of the 3 apps a requirement or not.

Testing on control, and not getting the true accuracy results as displayed in either TMM or GPS "Accuracy" in the apps. So, chasing the core question - to Mock or NOT to Mock and using the "internal" receiver in each of these apps would be great to have your TMM folks tell us what is best practice.   

Appreciate your time in this matter.