Mapping and GIS Solutions Community

 View Only

Trimble TDC650 with SBAS and Terraflex Premium offline GNSS Post Processing

  • 1.  Trimble TDC650 with SBAS and Terraflex Premium offline GNSS Post Processing

    Posted 04-04-2024 11:41

    Hello,

     

    We are using a  Trimble TDC 650 with the Terraflex Premium license to post process data offline in hopes of getting better accuracy than just the built in SBAS correction.  Our goal is to collect data with sub-meter accuracy.  While collecting data in the field, we are averaging 10 positions per feature (form). The estimated accuracy shown on the screen is well below our goal with estimated accuracies of 12-in. to 24-in (0.3m to 0.6m).  After we collect the data and sync it using Trimble Connect, several of our points are coming back with estimated accuracies outside of our goal, with post processed estimated accuracies of 1m to 3m.  Can anyone explain why the estimated post processed accuracy is worse than what is shown on the data logger when we collect the data?

     

    Secondly, does the position averaging start when the accuracy is within the specified goal (1 meter) for the internal real time SBAS correction or the estimated offline GNSS post processing correction?

     

    thanks

     

    Mike Bertotti

    Engineering

     

     

     

     

     

     

    615.289.3172

    mbertotti@clinchfield.com

    website

    Clinchfield.com

     

    CONFIDENTIALITY NOTICE: The information contained in this e-mail is confidential. It is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any copying, dissemination and/or distribution of this communication is strictly prohibited. If you received this communication in error, please notify us immediately by phone and return the original message to the above address