Penmap supports user defined coordinate systems

Document created by Cornelia Schmitz on Mar 22, 2019
Version 1Show Document
  • View in full screen mode

Penmap uses the coordinate systems from Trimble Geodetic Library (TGL). If the needed coordinate system is not available a new coordinate system can be build up via

Trimble Coordinate System Manager.

 

Trimble Coordinate System Manager is available for Microsoft Windows and in general installed with Trimble Business Center or Trimble Access.

It’s also downloadable via Trimble Installation Manager at Penmap Project Manager or Penmap for Windows area.

 

The attached support bulletin explains

  • Define a coordinate system in Trimble Coordinate System Manager
  • Export coordinate system from Trimble Coordinate System Manager to jxl
  • Use your user defined coordinate system in Penmap

 

Enhancement is available in:

  • Penmap for Windows 10.8.4.8154
  • Penmap for Android 10.8.5.949
  • Penmap Project Manager 10.8.3.960
  • Trimble Coordinate System Manager 3.6.4.0

Outcomes