The crew set up on the wrong control point in the field using scs900. I have the correct control for these points. How can I move all of my points to the correct coordinates?
Not so familiar with SCS900 but you should be able in TBC to change the coordinate or transform the coordinates using the known coordinate.
This user may not have TBC. How do you want to move the data? In your data collector? Which office software?
I do have TBC but limited experience, I don't know how to bring in the control points used. but if it can be corrected on the data collector that would be better they are using a tsc3, however the wrong control points used were from the .office files which I don't think you can edit in the controller.
This is for TBC because my knowledge of SCS is limited. When you import SPJ file from the controller you can not change data directly in the job because SPJ contains just the points measured. The solution, in my opinion would be to manually add control points with the correct coordinates and then transform the Survey points from wrong control used to the one that was manually entered.
Adding new points is under CAD-->Create point (choose Control quality)
Transforming survey points is under Survey-->Transform Survey points
Maybe Robert has a better answer for you. Have a good weekend.
Retrieving data ...