Is there a way to run multiple or all Alignment Geometry Reports at one time?
There's usually several alignments in most projects, recently I had a project with 53 alignments.
If you run the command Geometry Report, it allows you to select multiple alignments and generates an Excel Spreadsheet - one tab for each Alignment selected. While the format is not the same as the Alignment Geometry Report it may give you what you want.
Let me know
That gives what i need, thanks Alan!
I just ran a Geometry report on a alignment and found that it was giving me a bad bearing. I then ran a Alignment Report and gives me the bearing i used to build the alignment. Why is the Geometry report giving me a different bearing.
Retrieving data ...