Horizontal Window
On top of the menu, you find information identifying the selected element, what type of element it is and where it is.
Shortcut menu for pipe has the following selections:
Pipe
<Pipe Type> (<ConnectionX> - <ConnectionY>)
Insert >
Connection
The function is explained under Insert > In Pipe >
Vertex
The function is explained under Insert > In Pipe >
Move
The function is used for moving the end point of a pipe. Place the crosshair upon the pipe to be moved, press the right mouse button and select “Move” from the menu. The function grabs hold of the end of the pipe closest to the crosshair.
The command prompts for:
Position (x,y,z):
Click in the drawing where you want the pipe end to be moved.
The elevation is not being altered.
If you know the coordinates to where the pipe end is to be moved, you may just as well key in the coordinates from the keyboard.
Delete
The function is used for deleting a pipe from a section. Place the crosshair upon the pipe to be deleted, press the right mouse button and select “Delete” from the menu. The dialogue box Delete Pipe - <Pipe Type> appears.
Confirm delete by clicking Yes, cancel by clicking No.
The function deletes only the pipes, the connections in each end are not altered.
Copy Properties
The function is explained under Modify > Pipe >
Replace Geometry
The function is explained under Modify > Pipe >
Trace Section (<NodeX> - <NodeY>)
Insert >
Node
The function is explained under Insert > In Section >
Pipe
The function is explained under Insert > In Section >
Delete section
The function is explained under Modify
Delete Trench
The function is explained under Trench
Reverse Trench
The function is explained under Modify > Trench
View >
This function is explained under Node.
Vertical Window
On top of the menu, you find information identifying the selected element, what type of element it is and where it is.
Shortcut menu for pipe has the following selections:
Pipe
<Pipe Type> (<ConnectionX> - <ConnectionY>)
Insert Connection
The function is explained under Insert > In Pipe >
Level (z)
The function is used for changing the elevation of one of the ends of the pipe. Place the crosshair upon the pipe to be altered, press the right mouse button and select “Level (z)” from the menu. The function takes effect for the end of the pipe closest to the crosshair.
The command prompts for:
Level <Elevation> :
Key in the desired elevation. Please notice that only the pipe is altered, not the connection it is attached to.
Delete
The function is used for deleting a pipe in a section. Place the crosshair upon the pipe to be deleted, press the right mouse button and select “Delete” from the menu. The dialogue box Delete Pipe - <Pipe Type> appears.
Confirm delete by clicking Yes, cancel by clicking No.
The function deletes only the pipe, the connections in each end are not altered.
Copy Properties
The function is explained under Modify > Pipe >
Trench Section (<NodeX> - <NodeY>)
Insert Node
The function is explained under Insert > In Section >
Delete Section
The function is explained under Modify
View >
This function is explained under Node.