Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

how do you add a local site calibration from SCS900 to the Coordinate system Manager?

  • 1.  how do you add a local site calibration from SCS900 to the Coordinate system Manager?

    Posted 02-04-2020 13:46

    If using SCS900 to create a site calibration what is the easiest way to add that local site to the Coordinate System Manager (current.csd)? 

     

    Also if exporting shape files does the local site need to be in the Coordinate System Manager to be exported through the *.prj (projection) file?



  • 2.  Re: how do you add a local site calibration from SCS900 to the Coordinate system Manager?

    Posted 02-06-2020 14:17

    I would import the calibration into a project, then run "site calibration" after you compute, you can save the site. It will throw it in your CSM under Local Sites. I don't really deal with shape files too much unless I'm working with  GIS person. Are you sending these shape files to a third party?



  • 3.  Re: how do you add a local site calibration from SCS900 to the Coordinate system Manager?

    Posted 02-07-2020 11:31

    Hi.

     

    Read this maybe it is what are you looking for.

     

    SCS900 New Datum Create 



  • 4.  Re: how do you add a local site calibration from SCS900 to the Coordinate system Manager?

    Posted 02-14-2020 02:21

    Mike and Erik are both correcy here and that is the workflow you should use.

     

    Alan