Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

Would it be possible to apply side slopes to multiple reference lines at once?

  • 1.  Would it be possible to apply side slopes to multiple reference lines at once?

    Posted 03-28-2019 14:36

    I think there are a few cases were being able to apply sides slopes to multiple references lines at once would be beneficial. This would work well for a "first pass"  and then the user can go in and edit the templates to better fit the criteria need.

     

    The user would just have to be cognizant of the line direction.

     

    Maybe this could be accomplished with a macro.

     

    Cases:

    • Curb
    • Building Foundations
    • Jersey Barrier

     

     



  • 2.  Re: Would it be possible to apply side slopes to multiple reference lines at once?

    Posted 03-29-2019 15:37

    I am seeing if we could Copy the Template from one line to another - I am not sure we could select 100 lines and do them all automatically - the Question has been posed however - we will see what comes back from development - I would like to be able to set up the sideslope and the properties and then be able to apply it to this line and this line and this line etc without ever having to open the sideslope editor - that should be possible and would give a degree of automation but with the ability to still control the process



  • 3.  Re: Would it be possible to apply side slopes to multiple reference lines at once?

    Posted 03-30-2019 04:33

    The latter option would work well in my opinion and would reduce steps when rapid firing these side slope templates. 

     

    I can understand why selecting multiple references lines and trying to apply side slopes my cause issue. The click and apply maybe just a quick and provide a sense of QA/QC that having 100 being applied simultaneously would not.