Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

Not seeing closing angle in traverse adjustment

  • 1.  Not seeing closing angle in traverse adjustment

    Posted 09-23-2019 05:40

    I have a traverse that was ran with an SX-10. the initial set up was 1 backsighted 2 then went 3,4,5,6,7,502,501. 502 was point 2 and 501 was point 1. When i go to adjust the traverse it does not see the closing angle. Any thoughts suggestions. i have attached the .jxl and .job file. 

    Attachment(s)

    zip
    F-S-19-06.job.zip   17 KB 1 version
    zip
    F-S-19-06.jxl.zip   30 KB 1 version


  • 2.  Re: Not seeing closing angle in traverse adjustment

    Posted 09-23-2019 10:24

    When closing a traverse, you need to use the original point names for your beginning control points using the option "store another" when prompted that the point already exists instead of giving it a different name.  You need to change the names of 501 and 502 to 1 and 2.