Trimble Business Center

 View Only
Back to discussions
Expand all | Collapse all

Copy & Paste Error in a slope table

  • 1.  Copy & Paste Error in a slope table

    Posted 04-28-2020 15:21

    I'm using version 5.10.  Recently (within the past week), when using the Side Slope to add an instruction in Corridor modeling, when I build the Cut Table, the copy and paste it to the Fill Table, it loses the leading number in the stationing, and converts the cut ratio to a percent that is not accurate.  If I delete the fill table, recopy the cut table and repaste everything works.

     

    As a demonstration, my station in the cut table is 1439+00.00 with a slope of -2:1.  When I copy it, it comes in as 439+00.00 with a slope of -2.03%.



  • 2.  Re: Copy & Paste Error in a slope table

    Posted 04-29-2020 05:59

    Can you try this in v5.3 - we had an issue reported in 5.2 that was addressed we believe in 5.3.

     

    Alan



  • 3.  Re: Copy & Paste Error in a slope table

    Posted 05-04-2020 07:38

    Thanks Alan, 

     

    When we upgrade to 5.3, I'll try it.

     

    Robert



  • 4.  Re: Copy & Paste Error in a slope table

    Posted 05-05-2020 08:28

    if you not upgrading the version.  make these changes in Project Setting.

    distance > siffix as NO

    Station > Suffix as NO