Trimble Business Center

 View Only
Expand all | Collapse all

Enhancement: Change Elevation / Surface Elevation

  • 1.  Enhancement: Change Elevation / Surface Elevation

    Posted 11-10-2020 11:18

    When elevating a line to a surface the vertical elevations in the horizontal field are removed or nulled, and vertical is then fielded in the vertical tab of edit line string.(?) Which is excellent, I personally prefer working with elevations of a line in this format. Below is a line that requires elevating to a surface modification.

    Elevated line that needs to be brought up to a surface modifcation

    I have now used the Change Elevation command to elevate that line. Where the slope of the line does not change it will not populate a new VPI at every triangle. This limits my ability to control where triangles are created once these lines are used to generate a surface model.

    All of this is extremely important to me because I use this method to adjust my 3D line work which is going to be used to generate a site model out of multiple corridors and intersections. 



  • 2.  Re: Enhancement: Change Elevation / Surface Elevation

    Posted 11-10-2020 11:49

    So what are you asking for here Scott - the ability to create VPIs at all triangle side crossings regardless of the slope being constant or not?

     

    Alan



  • 3.  Re: Enhancement: Change Elevation / Surface Elevation

    Posted 11-10-2020 11:51

    YES PLEASE